Re: [PATCH v2 3/4] generic/{102,172,347}: Adapt test for XFS on systems with 128+CPUs + SSDs

On Thu, May 14, 2026 at 01:39:13PM +0200, Lukas Herbolt wrote:
> XFS will now scale by default its log size according the amount of CPUs. This
> can significantly increase the log area and using hard-coded size of file size
> will make the test file. Using the X percent of the free space to create the
> file will let the test proceed.
> 
> For generic/102 we also have to change the 102.out as we cannot know the
> amount written data and it has to be filtered out.
> 
> For generic/172 we just use the new function to calculate file big enough
> to consume most of the available space.
> 
> The generic/347 will use -l concurrency=0 in case it is being run on the
> XFS filesystem and mkfs.xfs already supports this option.
> 
> Signed-off-by: Lukas Herbolt <[email protected]>
> ---
>  changes v2:
> 	test: generic/102 change the file size to 80% as it's closer to 
> 	      original size of 800MB

Cool, thanks.

Reviewed-by: "Darrick J. Wong" <[email protected]>

--D


>  tests/generic/102     |  5 +++--
>  tests/generic/102.out | 20 ++++++++++----------
>  tests/generic/172     |  8 ++++----
>  tests/generic/347     |  9 ++++++++-
>  4 files changed, 25 insertions(+), 17 deletions(-)
> 
> diff --git a/tests/generic/102 b/tests/generic/102
> index daa5061bd3fe..be9ddda30a1d 100755
> --- a/tests/generic/102
> +++ b/tests/generic/102
> @@ -23,12 +23,13 @@ _require_scratch
>  dev_size=$((1024 * 1024 * 1024))     # 1GB filesystem
>  _scratch_mkfs_sized $dev_size >>$seqres.full 2>&1
>  _scratch_mount
> +file_size=`_mb_pct_of_available_space $SCRATCH_DEV 80`
>  
>  for ((i = 0; i < 10; i++)); do
>  	echo "loop $i" >>$seqres.full
>  
> -	$XFS_IO_PROG -f -c "pwrite -b 1m 0 800m" "$SCRATCH_MNT"/file | \
> -_filter_xfs_io | _filter_scratch
> +	$XFS_IO_PROG -f -c "pwrite -b 1m 0 ${file_size}m" "$SCRATCH_MNT"/file | \
> +_filter_xfs_io_numbers | _filter_scratch
>  
>  	rm -f "$SCRATCH_MNT"/file
>  done
> diff --git a/tests/generic/102.out b/tests/generic/102.out
> index b58aa5ccc68b..647bb23abec1 100644
> --- a/tests/generic/102.out
> +++ b/tests/generic/102.out
> @@ -1,21 +1,21 @@
>  QA output created by 102
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> -wrote 838860800/838860800 bytes at offset 0
> +wrote XXXX/XXXX bytes at offset XXXX
>  XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
> diff --git a/tests/generic/172 b/tests/generic/172
> index b67e817b667b..06f9370f065d 100755
> --- a/tests/generic/172
> +++ b/tests/generic/172
> @@ -37,15 +37,15 @@ echo "Reformat with appropriate size"
>  blksz="$(_get_block_size $testdir)"
>  _scratch_unmount
>  
> -file_size=$((768 * 1024 * 1024))
>  fs_size=$((1024 * 1024 * 1024))
>  _scratch_mkfs_sized $fs_size >> $seqres.full 2>&1
>  _scratch_mount >> $seqres.full 2>&1
>  rm -rf $testdir
>  mkdir $testdir
> +file_size=`_mb_pct_of_available_space $SCRATCH_DEV 70`
>  
>  echo "Create a big file and reflink it"
> -_pwrite_byte 0x61 0 $file_size $testdir/bigfile >> $seqres.full 2>&1
> +_pwrite_byte 0x61 0 ${file_size}m $testdir/bigfile >> $seqres.full 2>&1
>  _cp_reflink $testdir/bigfile $testdir/clonefile
>  _scratch_sync
>  
> @@ -54,7 +54,7 @@ _fill_fs $fs_size  $testdir/space $blksz 0 >> $seqres.full 2>&1
>  _scratch_sync
>  
>  echo "CoW the big file"
> -out="$(_pwrite_byte 0x62 0 $file_size $testdir/bigfile 2>&1 | \
> +out="$(_pwrite_byte 0x62 0 ${file_size}m $testdir/bigfile 2>&1 | \
>  	_filter_xfs_io_error)"
>  echo ${out} | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
>  echo ${out} >> $seqres.full 2>&1
> @@ -63,7 +63,7 @@ echo ${out}
>  echo "Remount and try CoW again"
>  _scratch_cycle_mount
>  
> -out="$(_pwrite_byte 0x62 0 $file_size $testdir/bigfile 2>&1 | \
> +out="$(_pwrite_byte 0x62 0 ${file_size}m $testdir/bigfile 2>&1 | \
>  	_filter_xfs_io_error)"
>  echo ${out} | grep -q "No space left on device" || echo "CoW should have failed with ENOSPC"
>  echo ${out} >> $seqres.full 2>&1
> diff --git a/tests/generic/347 b/tests/generic/347
> index 5c0e3f949585..06df0cf9eddc 100755
> --- a/tests/generic/347
> +++ b/tests/generic/347
> @@ -14,6 +14,13 @@ BACKING_SIZE=$((500 * 1024 * 1024 / 512))	# 500M
>  VIRTUAL_SIZE=$((10 * $BACKING_SIZE))		# 5000M
>  GROW_SIZE=$((100 * 1024 * 1024 / 512))		# 100M
>  
> +dmthin_mkfs_opts=""
> +if [ $FSTYP == "xfs" ]; then
> +	if _scratch_mkfs_xfs_supports_concurrency -l >> $seqres.full 2>&1; then
> +		dmthin_mkfs_opts="-l concurrency=0"
> +	fi
> +fi
> +
>  # Override the default cleanup function.
>  _cleanup()
>  {
> @@ -25,7 +32,7 @@ _setup_thin()
>  {
>  	_dmthin_init $BACKING_SIZE $VIRTUAL_SIZE
>  	_dmthin_set_queue
> -	_dmthin_mkfs
> +	_dmthin_mkfs $dmthin_mkfs_opts
>  	_dmthin_mount
>  }
>  
> -- 
> 2.54.0
> 
>