Re: [PATCH v6 05/11] fstests: verify fanotify isolation on cloned filesystems

On 29/5/26 12:36, Darrick J. Wong wrote:
> On Thu, May 28, 2026 at 12:05:36PM +0800, Anand Jain wrote:
>> Verify that fanotify events are correctly routed to the appropriate
>> watcher when cloned filesystems are mounted.
>> Helps verify kernel's event notification distinguishes between devices
>> sharing the same FSID/UUID.
>>
>> Signed-off-by: Anand Jain <[email protected]>
>> ---
>>  tests/generic/801     | 135 ++++++++++++++++++++++++++++++++++++++++++
>>  tests/generic/801.out |   7 +++
>>  2 files changed, 142 insertions(+)
>>  create mode 100644 tests/generic/801
>>  create mode 100644 tests/generic/801.out
>>
>> diff --git a/tests/generic/801 b/tests/generic/801
>> new file mode 100644
>> index 000000000000..3bfb87d41922
>> --- /dev/null
>> +++ b/tests/generic/801
>> @@ -0,0 +1,135 @@
>> +#! /bin/bash
>> +# SPDX-License-Identifier: GPL-2.0
>> +# Copyright (c) 2026 Anand Jain <[email protected]>.  All Rights Reserved.
>> +#
>> +# FS QA Test 801
>> +# Verify fanotify FID functionality on cloned filesystems by setting up
>> +# watchers and making sure notifications are in the correct logs files.
>> +
>> +. ./common/preamble
>> +
>> +_begin_fstest auto quick mount clone
>> +
>> +_require_test
>> +_require_block_device $TEST_DEV
>> +_require_loop
>> +_require_command "$FSNOTIFYWAIT_PROG" fsnotifywait
>> +_require_unique_f_fsid
>> +
>> +_cleanup()
>> +{
>> +	cd /
>> +	[[ -n $pid1 ]] && { kill -TERM "$pid1" 2> /dev/null; wait $pid1; }
>> +	[[ -n $pid2 ]] && { kill -TERM "$pid2" 2> /dev/null; wait $pid2; }
>> +
>> +	if [ "$semanage_added" = "yes" ]; then
>> +		semanage permissive -d unconfined_t >/dev/null 2>&1 || true
>> +	fi
>> +
>> +	umount $mnt1 $mnt2 2>/dev/null
>> +	_loop_image_destroy "${devs[@]}" 2> /dev/null
>> +	rm -r -f $tmp.*
>> +}
>> +



>> +# Run fsnotifywait in unbuffered mode to watch filesystem-wide create events
>> +monitor_fanotify()
>> +{
>> +	local mmnt=$1
>> +	exec stdbuf -oL $FSNOTIFYWAIT_PROG -m -F -S -e create "$mmnt" 2>&1
> 
> I guess you need stdbuf to force fsnotifywait to run in linebuffered
> mode even if you pipe/redirect it somewhere?
> 

yeah, stdbuf helps get the output as and when created.

>> +}
>> +
>> +# Transform f_fsid into the hi.lo format used in fanotify FID logs
>> +fsid_to_fid_parts()
>> +{
>> +	local fsid=$1
>> +	# Pad to 16 hex chars (64-bit), then split into two 32-bit halves
>> +	local padded=$(printf '%016x' "0x${fsid}")
>> +	local hi=$(printf '%x' "0x${padded:0:8}")   # strips leading zeros
>> +	local lo=$(printf '%x' "0x${padded:8:8}")   # strips leading zeros
>> +	echo "${hi}.${lo}"
>> +}
>> +
>> +# Create base loop device and its clone
>> +devs=()
>> +_loop_image_create_clone devs
>> +mkdir -p $TEST_DIR/$seq
>> +mnt1=$TEST_DIR/$seq/mnt1
>> +mnt2=$TEST_DIR/$seq/mnt2
>> +mkdir -p $mnt1
>> +mkdir -p $mnt2
>> +
>> +# Mount both base and clone filesystems using required clone mount options
>> +_mount $(_common_dev_mount_options) $(_clone_mount_option) ${devs[0]} $mnt1 || \
>> +						_fail "Failed to mount dev1"
>> +_mount $(_common_dev_mount_options) $(_clone_mount_option) ${devs[1]} $mnt2 || \
>> +						_fail "Failed to mount dev2"
>> +
>> +# Fetch filesystem IDs to verify the kernel can differentiate between them
>> +fsid1=$(stat -f -c "%i" $mnt1)
>> +fsid2=$(stat -f -c "%i" $mnt2)
>> +
>> +log1=$tmp.fanotify1
>> +log2=$tmp.fanotify2
>> +
>> +pid1=""
>> +pid2=""
>> +echo "Setup FID fanotify watchers on both mnt1 and mnt2"
>> +
>> +# Permit unconfined_t domains when SELinux is enforcing to prevent fanotify
>> +# blockages
>> +semanage_added="no"
>> +if [ "$(getenforce 2>/dev/null)" = "Enforcing" ]; then
>> +    if ! semanage permissive -l | grep -q "unconfined_t"; then
>> +        semanage permissive -a unconfined_t >/dev/null 2>&1 && semanage_added="yes"
>> +    fi
>> +fi
> 
> Is there a cleaner way to manage setting up and automatically undoing
> this step?
> 
> There might not be, since iirc the suggestion to register cleanup
> functions in a cleanups=() array and call them all in reverse order
> didn't go anywhere.
> 

If there are multiple use cases, we could wrap it up in a helper,
similar to _scratch_dev_pool_{get|put}, if it helps.

Thanks, Anand


>> +
>> +# Start asynchronous fanotify monitors
>> +( monitor_fanotify "$mnt1" > "$log1" ) &
>> +pid1=$!
>> +( monitor_fanotify "$mnt2" > "$log2" ) &
>> +pid2=$!
>> +sleep 2
>> +
>> +echo "Trigger file creation on mnt1"
>> +touch $mnt1/file_on_mnt1
>> +sync
>> +sleep 1
>> +
>> +echo "Trigger file creation on mnt2"
>> +touch $mnt2/file_on_mnt2
>> +sync
>> +sleep 1
>> +
>> +echo "Verify fsid in the fanotify"
>> +kill $pid1 $pid2
>> +wait $pid1 $pid2 2>/dev/null
>> +pid1=""
>> +pid2=""
>> +
>> +e_fsid1=$(fsid_to_fid_parts "$fsid1")
>> +e_fsid2=$(fsid_to_fid_parts "$fsid2")
>> +
>> +# Dump debug details to the full log
>> +echo $fsid1 $e_fsid1 $fsid2 $e_fsid2 >> $seqres.full
>> +cat $log1 >> $seqres.full
>> +cat $log2 >> $seqres.full
>> +
>> +# Ensure monitor 1 only captured events belonging to mnt 1 and fsid 1
>> +if grep -qF "$e_fsid1" "$log1" && ! grep -qF "$e_fsid2" "$log1"; then
>> +	echo "SUCCESS: mnt1 events found"
>> +else
>> +	[ ! -s "$log1" ] && echo "  - mnt1 received no events."
>> +	grep -qF "$e_fsid2" "$log1" && echo "  - mnt1 received event from mnt2."
>> +fi
>> +
>> +# Ensure monitor 2 only captured events belonging to mnt 2 and fsid 2
>> +if grep -qF "$e_fsid2" "$log2" && ! grep -qF "$e_fsid1" "$log2"; then
>> +	echo "SUCCESS: mnt2 events found"
>> +else
>> +	[ ! -s "$log2" ] && echo "  - mnt2 received no events."
>> +	grep -qF "$e_fsid1" "$log2" && echo "  - mnt2 received event from mnt1."
>> +fi
>> +
>> +status=0
>> +exit
>> diff --git a/tests/generic/801.out b/tests/generic/801.out
>> new file mode 100644
>> index 000000000000..d7b318d9f27c
>> --- /dev/null
>> +++ b/tests/generic/801.out
>> @@ -0,0 +1,7 @@
>> +QA output created by 801
>> +Setup FID fanotify watchers on both mnt1 and mnt2
>> +Trigger file creation on mnt1
>> +Trigger file creation on mnt2
>> +Verify fsid in the fanotify
>> +SUCCESS: mnt1 events found
>> +SUCCESS: mnt2 events found
>> -- 
>> 2.43.0
>>
>>