[PATCH 4/5] generic: test I/O on devices with T10 protection information

Christoph Hellwig <[email protected]>
Newsgroups org.kernel.vger.fstests,org.kernel.vger.linux-scsi
Message-ID <[email protected]> 
Add a test that runs fsx in buffered and direct I/O mode on T10 PI
type 1, 2, 3 with and without strip/insert using scsi_debug.

Signed-off-by: Christoph Hellwig <[email protected]>
---
 tests/generic/2301     | 91 ++++++++++++++++++++++++++++++++++++++++++
 tests/generic/2301.out | 73 +++++++++++++++++++++++++++++++++
 2 files changed, 164 insertions(+)
 create mode 100755 tests/generic/2301
 create mode 100644 tests/generic/2301.out

diff --git a/tests/generic/2301 b/tests/generic/2301
new file mode 100755
index 000000000000..ba6952855f55
--- /dev/null
+++ b/tests/generic/2301
@@ -0,0 +1,91 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2026 Christoph Hellwig
+#
+# FS QA Test No. 2301
+#
+# Basix FSX sanity check when using T10 protection information
+#
+. ./common/preamble
+_begin_fstest auto rw pi dangerous
+
+_cleanup()
+{
+	cd /
+	rm -r -f $tmp.*
+	[ -d "$SCSI_DEBUG_MNT" ] && _unmount $SCSI_DEBUG_MNT 2>/dev/null
+	_put_scsi_debug_dev
+}
+
+. ./common/scsi_debug
+
+_require_debugfs
+_require_scsi_debug
+# If TEST_DEV is block device, make sure current fs is a localfs which can be
+# written on scsi_debug device
+_require_test
+_require_block_device $TEST_DEV
+_require_odirect
+
+size=$(_small_fs_size_mb 256)
+
+# like run_fsx(), but using a custom path
+fsx_run()
+{
+	_run_fsx_on_file $SCSI_DEBUG_MNT/junk $@ || _exit 1
+}
+
+test_dif()
+{
+	local pi_type=$1
+	local pi_enable="$2"
+
+	scsi_debug_pi_opts="write_same_length=0 dif=${pi_type} dix=1"
+	SCSI_DEBUG_DEV=`_get_scsi_debug_dev 512 512 0 $size $scsi_debug_pi_opts`
+
+	SCSI_DEBUG_MNT="$TEST_DIR/scsi_debug_$seq"
+	rm -rf $SCSI_DEBUG_MNT
+	mkdir $SCSI_DEBUG_MNT
+
+	_mkfs_dev $SCSI_DEBUG_DEV || \
+		_fail "Can't make $FSTYP on DIF-enabled scsi_debug device"
+	run_check _mount $SCSI_DEBUG_DEV $SCSI_DEBUG_MNT
+	bsize=$($here/src/min_dio_alignment $SCSI_DEBUG_MNT $SCSI_DEBUG_DEV)
+
+	local integrity_path="$(_sysfs_block_integrity_path $SCSI_DEBUG_DEV)"
+	echo $pi_enable > $integrity_path/read_verify
+	echo $pi_enable > $integrity_path/write_generate
+
+	# fsx load similar to generic/091
+	echo "Testing direct I/O for DIF type $pi_type (enabled: $pi_enable)"
+	local dio_opts="-r PSIZE -t BSIZE -w BSIZE"
+	fsx_run -N 10000            -l 500000 -r BSIZE -w BSIZE -Z -R -W
+	fsx_run -N 10000  -o 8192   -l 500000 -r BSIZE -w BSIZE -Z -R -W
+	fsx_run -N 10000  -o 32768  -l 500000 -r BSIZE -w BSIZE -Z -R -W
+	fsx_run -N 10000  -o 8192   -l 500000 -r BSIZE -w BSIZE -Z -R -W
+	fsx_run -N 10000  -o 32768  -l 500000 -r BSIZE -w BSIZE -Z -R -W
+	fsx_run -N 10000  -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+
+	# fsx load similar to generic/091 but using buffered I/O
+	echo "Testing buffered I/O for DIF type $pi_type (enabled: $pi_enable)"
+	fsx_run -N 10000            -l 500000
+	fsx_run -N 10000  -o 8192   -l 500000
+	fsx_run -N 10000  -o 32768  -l 500000
+	fsx_run -N 10000  -o 128000 -l 500000
+
+	[ -d "$SCSI_DEBUG_MNT" ] && _unmount $SCSI_DEBUG_MNT 2>/dev/null
+	_put_scsi_debug_dev
+}
+
+# Test with PI fully enabled
+test_dif 1 1
+test_dif 2 1
+test_dif 3 1
+
+# Test with strip / insert in the HBA
+test_dif 1 0
+test_dif 2 0
+test_dif 3 0
+
+# success, all done
+_exit 0
diff --git a/tests/generic/2301.out b/tests/generic/2301.out
new file mode 100644
index 000000000000..dda88676a219
--- /dev/null
+++ b/tests/generic/2301.out
@@ -0,0 +1,73 @@
+QA output created by 2301
+Testing direct I/O for DIF type 1 (enabled: 1)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 1 (enabled: 1)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
+Testing direct I/O for DIF type 2 (enabled: 1)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 2 (enabled: 1)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
+Testing direct I/O for DIF type 3 (enabled: 1)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 3 (enabled: 1)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
+Testing direct I/O for DIF type 1 (enabled: 0)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 1 (enabled: 0)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
+Testing direct I/O for DIF type 2 (enabled: 0)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 2 (enabled: 0)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
+Testing direct I/O for DIF type 3 (enabled: 0)
+fsx -N 10000 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 8192 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 32768 -l 500000 -r BSIZE -w BSIZE -Z -R -W
+fsx -N 10000 -o 128000 -l 500000 -r BSIZE -w BSIZE -Z -W
+Testing buffered I/O for DIF type 3 (enabled: 0)
+fsx -N 10000 -l 500000
+fsx -N 10000 -o 8192 -l 500000
+fsx -N 10000 -o 32768 -l 500000
+fsx -N 10000 -o 128000 -l 500000
-- 
2.53.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.