[GSoC PATCH v5 6/6] builtin/repack: add guards for --drop-filtered

--drop-filtered removes local promisor blobs. That is only safe when the
repository is not mid-operation and when the blobs are not actively in
use, so add two guards, both skipped for bare repositories which have
neither a worktree nor an index.

First, refuse to run while a merge, rebase, am, cherry-pick, revert, or
bisect is in progress. During these operations the working tree and
index are in an intermediate state, and rewriting packs and deleting
objects underneath a half-finished operation is unsafe.

Second, refuse to drop a blob that the current index references. Such a
blob is needed by the working tree, so dropping it would only cause the
next command that touches the worktree to lazy-fetch it straight back,
reclaiming nothing. The offending path is reported so the user can see
why the drop was refused.

Mentored-by: Christian Couder <[email protected]>
Mentored-by: Siddharth Asthana <[email protected]>
Signed-off-by: Siddharth Shrimali <[email protected]>
---
 Documentation/git-repack.adoc   |  9 ++++++
 builtin/repack.c                | 52 +++++++++++++++++++++++++++++++++
 t/t7706-repack-drop-filtered.sh | 35 ++++++++++++++++++++++
 3 files changed, 96 insertions(+)

diff --git a/Documentation/git-repack.adoc b/Documentation/git-repack.adoc
index 130249a139..a1f9e64f66 100644
--- a/Documentation/git-repack.adoc
+++ b/Documentation/git-repack.adoc
@@ -204,6 +204,15 @@ and with bitmap writing (`-b`/`--write-bitmap-index`), since filtering
 breaks the single-pack closure that bitmaps require. A bitmap setting
 coming from configuration is silently disabled for the duration of the
 command.
++
+As a convenience, since dropped objects remain recoverable by lazy fetch,
+`--drop-filtered` refuses to run while another operation
+(merge, rebase, am, cherry-pick, revert, or bisect) is in progress, to
+avoid a surprising network fetch mid-operation, and refuses to drop any
+blob that the current index references, since such a blob would only be
+lazily re-fetched by the next command that inspects the working tree.
+These checks are skipped in bare repositories, which have neither a
+working tree nor an index.
 
 --dry-run::
 	Only meaningful with `--drop-filtered`. List the objects that
diff --git a/builtin/repack.c b/builtin/repack.c
index a5f13fdd87..c4360382c1 100644
--- a/builtin/repack.c
+++ b/builtin/repack.c
@@ -17,6 +17,8 @@
 #include "list-objects-filter-options.h"
 #include "oidset.h"
 #include "hex.h"
+#include "wt-status.h"
+#include "read-cache-ll.h"
 
 #define ALL_INTO_ONE 1
 #define LOOSEN_UNREACHABLE 2
@@ -317,6 +319,33 @@ int cmd_repack(int argc,
 		if (!repo_has_promisor_remote(repo))
 			die(_("--drop-filtered requires a promisor remote"));
 
+		/*
+		 * Refuse to run while another operation is in progress. A
+		 * dropped object would just be lazily re-fetched when the
+		 * operation resumes, but triggering a network fetch in the
+		 * middle of a half-finished
+		 * merge/rebase/cherry-pick/revert/bisect is a poor
+		 * experience, so this is a UX convenience rather than a
+		 * safety measure. Bare repositories have no such state, so
+		 * the check is skipped there.
+		 */
+		if (!is_bare_repository(repo)) {
+			struct wt_status_state state = { 0 };
+
+			wt_status_get_state(repo, &state, 0);
+			if (state.merge_in_progress || state.revert_in_progress ||
+			    state.rebase_in_progress || state.bisect_in_progress ||
+			    state.cherry_pick_in_progress || state.am_in_progress ||
+			    state.rebase_interactive_in_progress) {
+				wt_status_state_free_buffers(&state);
+				die(_("--drop-filtered cannot be used while "
+				      "another operation (merge, rebase, am, "
+				      "cherry-pick, revert, or bisect) is in "
+				      "progress"));
+			}
+			wt_status_state_free_buffers(&state);
+		}
+
 		write_bitmaps = 0;
 
 		/*
@@ -332,6 +361,29 @@ int cmd_repack(int argc,
 		if (ret)
 			goto cleanup;
 
+		/*
+		 * Refuse to drop blobs that the current index references.
+		 * Such a blob would only be lazily re-fetched by the next
+		 * command that touches the worktree, so dropping it reclaims
+		 * nothing. This guard just avoids that churn. Bare
+		 * repositories have no index, so the check is skipped there.
+		 */
+		if (!is_bare_repository(repo) && oidset_size(&drop_oids)) {
+			struct index_state *istate = repo->index;
+			unsigned int i;
+
+			if (repo_read_index(repo) < 0)
+				die(_("could not read the index"));
+
+			for (i = 0; i < istate->cache_nr; i++) {
+				const struct cache_entry *ce = istate->cache[i];
+
+				if (oidset_contains(&drop_oids, &ce->oid))
+					die(_("cannot drop '%s' (%s): it is referenced by the current index"),
+						ce->name, oid_to_hex(&ce->oid));
+			}
+		}
+
 		if (dry_run) {
 			struct oidset_iter iter;
 			const struct object_id *oid;
diff --git a/t/t7706-repack-drop-filtered.sh b/t/t7706-repack-drop-filtered.sh
index 80c695742f..cb36115834 100755
--- a/t/t7706-repack-drop-filtered.sh
+++ b/t/t7706-repack-drop-filtered.sh
@@ -147,4 +147,39 @@ test_expect_success '--drop-filtered removes the promisor blob locally' '
 	test_grep "$SMALL" present
 '
 
+test_expect_success '--drop-filtered refuses when a merge is in progress' '
+	test_when_finished "git -C repo merge --abort || :" &&
+
+	# Create a conflicting merge so wt_status reports it.
+	git -C repo checkout -B mergebase base &&
+	echo one >repo/conflict.txt &&
+	git -C repo add conflict.txt &&
+	git -C repo commit -m one &&
+
+	git -C repo checkout -B mergeother base &&
+	echo two >repo/conflict.txt &&
+	git -C repo add conflict.txt &&
+	git -C repo commit -m two &&
+
+	test_must_fail git -C repo merge mergebase &&
+
+	test_must_fail git -C repo -c repack.writeBitmaps=false \
+		repack --drop-filtered --filter=blob:limit=1k --dry-run -a 2>err &&
+	test_grep "in progress" err
+'
+
+test_expect_success '--drop-filtered refuses to drop an index-referenced blob' '
+	# Create a large blob, add it to the index and make it a promisor object
+	# so the index references it and enumeration picks it up.
+	test-tool genrandom idx 4096 >repo/tracked-big.bin &&
+	git -C repo add tracked-big.bin &&
+	OID=$(git -C repo rev-parse :tracked-big.bin) &&
+	printf "%s\n" "$OID" | pack_as_from_promisor >/dev/null &&
+	delete_object repo "$OID" &&
+
+	test_must_fail git -C repo -c repack.writeBitmaps=false \
+		repack --drop-filtered --filter=blob:limit=1k --dry-run -a 2>err &&
+	test_grep "referenced by the current index" err
+'
+
 test_done
-- 
2.54.0