Re: [PATCH v4 1/1] powerpc/pseries: Interface to represent PAPR firmware attributes

On 17/07/21 12:35 am, Fabiano Rosas wrote:
> "Pratik R. Sampat" <[email protected]> writes:
>
>> +#include <linux/module.h>
>> +#include <linux/types.h>
>> +#include <linux/errno.h>
>> +#include <linux/init.h>
>> +#include <linux/seq_file.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/hugetlb.h>
>> +#include <asm/lppaca.h>
>> +#include <asm/hvcall.h>
>> +#include <asm/firmware.h>
>> +#include <asm/time.h>
>> +#include <asm/prom.h>
>> +#include <asm/vdso_datapage.h>
>> +#include <asm/vio.h>
>> +#include <asm/mmu.h>
>> +#include <asm/machdep.h>
>> +#include <asm/drmem.h>
> Do you need all of these headers? Sorry to mention just now, I seem to have
> dropped this comment from a previous review.

Ah yes, that was a TODO on my part I had missed as cleanups.
I'll verify if I do need all of them and get back to you.

>> +
>> +#include "pseries.h"
>> +
>> +/*
>> + * Flag attributes to fetch either all or one attribute from the HCALL
>> + * flag = BE(0) => fetch all attributes with firstAttributeId = 0
>> + * flag = BE(1) => fetch a single attribute with firstAttributeId = id
>> + */
>> +#define ESI_FLAGS_ALL		0
>> +#define ESI_FLAGS_SINGLE	PPC_BIT(0)
>> +
>> +#define MAX_ATTRS		3
>> +
>> +struct papr_attr {
>> +	u64 id;
>> +	struct kobj_attribute kobj_attr;
>> +};
>> +struct papr_group {
>> +	struct attribute_group pg;
>> +	struct papr_attr pgattrs[MAX_ATTRS];
>> +} *pgs;
>> +
>> +/* /sys/firmware/papr */
>> +struct kobject *papr_kobj;
>> +/* /sys/firmware/papr/energy_scale_info */
>> +struct kobject *esi_kobj;
>> +
>> +/*
>> + * Extract and export the description of the energy scale attribute
>> + *
> Extra line here.
ack.
>> + */
>> +static ssize_t papr_show_desc(struct kobject *kobj,
>> +			       struct kobj_attribute *kobj_attr,
>> +			       char *buf)
>> +{
>> +	struct papr_attr *pattr = container_of(kobj_attr, struct papr_attr,
>> +					       kobj_attr);
>> +	struct h_energy_scale_info_hdr *t_hdr;
>> +	struct energy_scale_attribute *t_esi;
>> +	char *t_buf;
>> +	int ret = 0;
>> +
>> +	t_buf = kmalloc(MAX_BUF_SZ, GFP_KERNEL);
>> +	if (t_buf = NULL)
>> +		return -ENOMEM;
>> +
>> +	ret = plpar_hcall_norets(H_GET_ENERGY_SCALE_INFO, ESI_FLAGS_SINGLE,
>> +				 pattr->id, virt_to_phys(t_buf),
>> +				 MAX_BUF_SZ);
>> +
>> +	if (ret != H_SUCCESS) {
>> +		pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");
>> +		goto out;
>> +	}
>> +
>> +	t_hdr = (struct h_energy_scale_info_hdr *) t_buf;
>> +	t_esi = (struct energy_scale_attribute *)
>> +		(t_buf + be64_to_cpu(t_hdr->array_offset));
>> +
>> +	ret = snprintf(buf, sizeof(t_esi->desc), "%s\n", t_esi->desc);
>> +	if (ret < 0)
>> +		ret = -EIO;
>> +out:
>> +	kfree(t_buf);
>> +
>> +	return ret;
>> +}
>> +
>> +/*
>> + * Extract and export the numeric value of the energy scale attributes
>> + */
>> +static ssize_t papr_show_value(struct kobject *kobj,
>> +				struct kobj_attribute *kobj_attr,
>> +				char *buf)
>> +{
>> +	struct papr_attr *pattr = container_of(kobj_attr, struct papr_attr,
>> +					       kobj_attr);
>> +	struct h_energy_scale_info_hdr *t_hdr;
>> +	struct energy_scale_attribute *t_esi;
>> +	char *t_buf;
>> +	int ret = 0;
>> +
>> +	t_buf = kmalloc(MAX_BUF_SZ, GFP_KERNEL);
>> +	if (t_buf = NULL)
>> +		return -ENOMEM;
>> +
>> +	ret = plpar_hcall_norets(H_GET_ENERGY_SCALE_INFO, ESI_FLAGS_SINGLE,
>> +				 pattr->id, virt_to_phys(t_buf),
>> +				 MAX_BUF_SZ);
>> +
>> +	if (ret != H_SUCCESS) {
>> +		pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");
>> +		goto out;
>> +	}
>> +
>> +	t_hdr = (struct h_energy_scale_info_hdr *) t_buf;
>> +	t_esi = (struct energy_scale_attribute *)
>> +		(t_buf + be64_to_cpu(t_hdr->array_offset));
>> +
>> +	ret = snprintf(buf, sizeof(t_esi->value), "%llu\n",
>> +		       be64_to_cpu(t_esi->value));
>> +	if (ret < 0)
>> +		ret = -EIO;
>> +out:
>> +	kfree(t_buf);
>> +
>> +	return ret;
>> +}
>> +
>> +/*
>> + * Extract and export the value description in string format of the energy
>> + * scale attributes
>> + */
>> +static ssize_t papr_show_value_desc(struct kobject *kobj,
>> +				     struct kobj_attribute *kobj_attr,
>> +				     char *buf)
>> +{
>> +	struct papr_attr *pattr = container_of(kobj_attr, struct papr_attr,
>> +					       kobj_attr);
>> +	struct h_energy_scale_info_hdr *t_hdr;
>> +	struct energy_scale_attribute *t_esi;
>> +	char *t_buf;
>> +	int ret = 0;
>> +
>> +	t_buf = kmalloc(MAX_BUF_SZ, GFP_KERNEL);
>> +	if (t_buf = NULL)
>> +		return -ENOMEM;
>> +
>> +	ret = plpar_hcall_norets(H_GET_ENERGY_SCALE_INFO, ESI_FLAGS_SINGLE,
>> +				 pattr->id, virt_to_phys(t_buf),
>> +				 MAX_BUF_SZ);
>> +
>> +	if (ret != H_SUCCESS) {
>> +		pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");
>> +		goto out;
>> +	}
>> +
>> +	t_hdr = (struct h_energy_scale_info_hdr *) t_buf;
>> +	t_esi = (struct energy_scale_attribute *)
>> +		(t_buf + be64_to_cpu(t_hdr->array_offset));
>> +
>> +	ret = snprintf(buf, sizeof(t_esi->value_desc), "%s\n",
>> +		       t_esi->value_desc);
>> +	if (ret < 0)
>> +		ret = -EIO;
>> +out:
>> +	kfree(t_buf);
>> +
>> +	return ret;
>> +}
>> +
>> +static struct papr_ops_info {
>> +	const char *attr_name;
>> +	ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *kobj_attr,
>> +			char *buf);
>> +} ops_info[MAX_ATTRS] = {
>> +	{ "desc", papr_show_desc },
>> +	{ "value", papr_show_value },
>> +	{ "value_desc", papr_show_value_desc },
>> +};
>> +
>> +static void add_attr(u64 id, int index, struct papr_attr *attr)
>> +{
>> +	attr->id = id;
>> +	sysfs_attr_init(&attr->kobj_attr.attr);
>> +	attr->kobj_attr.attr.name = ops_info[index].attr_name;
>> +	attr->kobj_attr.attr.mode = 0444;
>> +	attr->kobj_attr.show = ops_info[index].show;
>> +}
>> +
>> +static int add_attr_group(u64 id, int len, struct papr_group *pg,
>> +			  bool show_val_desc)
>> +{
>> +	int i;
>> +
>> +	for (i = 0; i < len; i++) {
> Could use MAX_ATTRS directly.

Sure, while writing this initially I wasn't sure how many attrs we'd have so it
passed as param, now I see that's not needed so I can remove that and use
MAX_ATTRS itself

>> +		if (!strcmp(ops_info[i].attr_name, "value_desc") &&
>> +		    !show_val_desc) {
>> +			continue;
>> +		}
>> +		add_attr(id, i, &pg->pgattrs[i]);
>> +		pg->pg.attrs[i] = &pg->pgattrs[i].kobj_attr.attr;
>> +	}
>> +
>> +	return sysfs_create_group(esi_kobj, &pg->pg);
>> +}
>> +
>> +static int __init papr_init(void)
>> +{
>> +	struct h_energy_scale_info_hdr *esi_hdr;
>> +	struct energy_scale_attribute *esi_attrs;
>> +	uint64_t num_attrs;
>> +	int ret, idx, i;
>> +	char *esi_buf;
>> +
>> +	if (!firmware_has_feature(FW_FEATURE_LPAR))
>> +		return -ENXIO;
>> +
>> +	esi_buf = kmalloc(MAX_BUF_SZ, GFP_KERNEL);
>> +	if (esi_buf = NULL)
>> +		return -ENOMEM;
>> +	/*
>> +	 * hcall(
>> +	 * uint64 H_GET_ENERGY_SCALE_INFO,  // Get energy scale info
>> +	 * uint64 flags,            // Per the flag request
>> +	 * uint64 firstAttributeId, // The attribute id
>> +	 * uint64 bufferAddress,    // Guest physical address of the output buffer
>> +	 * uint64 bufferSize);      // The size in bytes of the output buffer
>> +	 */
>> +	ret = plpar_hcall_norets(H_GET_ENERGY_SCALE_INFO, ESI_FLAGS_ALL, 0,
>> +				 virt_to_phys(esi_buf), MAX_BUF_SZ);
>> +	if (ret != H_SUCCESS) {
>> +		pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");
>> +		goto out;
>> +	}
>> +
>> +	esi_hdr = (struct h_energy_scale_info_hdr *) esi_buf;
>> +	if (esi_hdr->data_header_version != ESI_VERSION) {
>> +		pr_warn("H_GET_ENERGY_SCALE_INFO VER MISMATCH - EXP: 0x%x, REC: 0x%x",
>> +			ESI_VERSION, esi_hdr->data_header_version);
>> +	}
>> +
>> +	num_attrs = be64_to_cpu(esi_hdr->num_attrs);
>> +	esi_attrs = (struct energy_scale_attribute *)
>> +		    (esi_buf + be64_to_cpu(esi_hdr->array_offset));
>> +
>> +	pgs = kcalloc(num_attrs, sizeof(*pgs), GFP_KERNEL);
>> +	if (!pgs)
>> +		goto out;
>> +
>> +	papr_kobj = kobject_create_and_add("papr", firmware_kobj);
>> +	if (!papr_kobj) {
>> +		pr_warn("kobject_create_and_add papr failed\n");
>> +		goto out_pgs;
>> +	}
>> +
>> +	esi_kobj = kobject_create_and_add("energy_scale_info", papr_kobj);
>> +	if (!esi_kobj) {
>> +		pr_warn("kobject_create_and_add energy_scale_info failed\n");
>> +		goto out_kobj;
>> +	}
>> +
>> +	for (idx = 0; idx < num_attrs; idx++) {
>> +		bool show_val_desc = true;
>> +
>> +		pgs[idx].pg.attrs = kcalloc(MAX_ATTRS + 1,
>> +					    sizeof(*pgs[idx].pg.attrs),
>> +					    GFP_KERNEL);
>> +		if (!pgs[idx].pg.attrs)
>> +			goto out_ekobj;
> What about the attrs allocated during the previous iterations?

Yes, you're right that needs cleanups.
I could write the following to clean up old entries like I did when space for
name couldn't be allocated:
for (i = idx - 1; i >= 0; i++)
	kfree(pgs[i].pg.attrs);
Thanks for pointing that out.

>> +
>> +		pgs[idx].pg.name = kasprintf(GFP_KERNEL, "%lld",
>> +					     be64_to_cpu(esi_attrs[idx].id));
>> +		if (pgs[idx].pg.name = NULL) {
>> +			for (i = idx; i >= 0; i--)
>> +				kfree(pgs[i].pg.attrs);
>> +			goto out_ekobj;
>> +		}
>> +		/* Do not add the value description if it does not exist */
>> +		if (strlen(esi_attrs[idx].value_desc) = 0)
> strnlen

ack

>
>> +			show_val_desc = false;
>> +
>> +		if (add_attr_group(be64_to_cpu(esi_attrs[idx].id),
>> +				   MAX_ATTRS, &pgs[idx], show_val_desc)) {
>> +			pr_warn("Failed to create papr attribute group %s\n",
>> +				pgs[idx].pg.name);
>> +			goto out_pgattrs;
>> +		}
>> +	}
>> +
>> +	kfree(esi_buf);
>> +	return 0;
>> +
>> +out_pgattrs:
>> +	for (i = 0; i < MAX_ATTRS ; i++) {
> pgs is num_attrs long

Ah yes, you're right. It should loop over num_attrs

>
>> +		kfree(pgs[i].pg.attrs);
>> +		kfree(pgs[i].pg.name);
>> +	}
>> +out_ekobj:
>> +	kobject_put(esi_kobj);
>> +out_kobj:
>> +	kobject_put(papr_kobj);
>> +out_pgs:
>> +	kfree(pgs);
>> +out:
>> +	kfree(esi_buf);
>> +
>> +	return -ENOMEM;
>> +}
>> +
>> +machine_device_initcall(pseries, papr_init);