Buferbloat, ethernet hardware parameters and LACP bonds...

Following the 'bufferbloat' recommendation:

        https://www.bufferbloat.net/projects/bloat/wiki/Tests_for_Bufferblo=
at/

i've added to a typical bridge (in a debian/ProxmoxVE server):

 iface enp2s0f1 inet manual
        ethernet-autoneg on
        link-speed 100
        link-duplex full
        hardware-dma-ring-tx 18
        offload-tso off
        offload-gso off
        offload-gro off

 auto vmbr1
 iface vmbr1 inet static
        address 172.17.44.50
        netmask 255.255.255.0
        gateway 172.17.44.1
        bridge_ports enp2s0f1
        bridge_waitport 30
        bridge_stp off
        bridge_fd 0

and seems to work, eg link speed is 100Mbit/s and offload parameters
are off.


But i've tried to do the same thing with an LACP bond, adding this paramete=
rs
both to single interfaces and also on the bond interface, both seems get
ignored.


It is not possible to set hardware parameters in bond and/or in bond
members?!


Thanks.

--=20
dott. Marco Gaiarin				        GNUPG Key ID: 240A3D66
  Associazione ``La Nostra Famiglia''          http://www.lanostrafamiglia.=
it/
  Polo FVG   -   Via della Bont=E0, 7 - 33078   -   San Vito al Tagliamento=
 (PN)
  marco.gaiarin(at)lanostrafamiglia.it   t +39-0434-842711   f +39-0434-842=
797

		Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA!
      http://www.lanostrafamiglia.it/index.php/it/sostienici/5x1000
	(cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA)