Re: Traffic shaping at 10~300mbps at a 10Gbps link
Adam Niescierowicz <[email protected]> Wed, 09 Jun 2021 19:11:03 +0000
| Newsgroups | org.kernel.vger.lartc |
|---|---|
| Message-ID | <[email protected]> |
This is a multi-part message in MIME format. --------------76EB2DE500803A6F233D20CC Content-Type: text/plain; charset="utf-8"; format="flowed" Content-Transfer-Encoding: 8bit How you make filters, it's one level or multilevel based? W dniu 09.06.2021 o 17:04, Ethy H. Brito pisze: > Hi Guys! > > Doesn't anybody can help me with this? > Any help will be appreciated. > > Cheers > > Ethy > > > On Mon, 7 Jun 2021 13:38:53 -0300 > "Ethy H. Brito" <[email protected]> wrote: > >> Hi >> >> I am having a hard time trying to shape 3000 users at ceil speeds from 10 to 300mbps in a 7/7Gbps link using >> HTB+SFQ+TC(filter by IP hashkey mask) for a few days now tweaking HTB and SFQ parameters with no luck so far. >> >> Everything seems right, up 4Gbps overall download speed with shaping on. >> I have no significant packets delay, no dropped packets and no high CPU average loads (not more than 20% - htop info) >> >> But when the speed comes to about 4.5Gbps download (upload is about 500mbps), chaos kicks in. >> CPU load goes sky high (all 24x2.4Ghz physical cores above 90% - 48x2.4Ghz if count that virtualization is on) and as a >> consequence packets are dropped (as reported by tc -s class sh ...), RTT goes above 200ms and a lots of ungry users. This >> goes from about 7PM to 11 PM every day. >> >> If I turn shaping off, everything return to normality immediately and peaks of not more than 5Gbps (1 second average) are >> observed and a CPU load of about 5%. So I infer the uplink is not crowded. >> >> I use one root HTB qdisc and one root (1:) HTB class. >> Then about 20~30 same level (1:xx) inner classes to (sort of) separate the users by region >> And under these inner classes, goes the almost 3000 leaves (1:xxxx). >> I have one class with about 900 users and this quantity decreases by the other inner classes having some of them with just >> one user. >> >> Is the way I'm using HTB+SFQ+TC suitable for this job? >> >> Since the script that creates the shaping environment is too long I do not post it here. >> >> What can I inform you guys to help me solve this? >> Fragments of code, stats, some measurements? What? >> >> Thanks. >> >> Regards >> >> Ethy > -- --- Pozdrawiam Adam Nieścierowicz --------------76EB2DE500803A6F233D20CC Content-Type: text/x-vcard; charset=utf-8; name="adam_niescierowicz.vcf" Content-Transfer-Encoding: 7bit Content-Disposition: attachment; filename="adam_niescierowicz.vcf" begin:vcard fn;quoted-printable:Adam Nie=C5=9Bcierowicz n;quoted-printable:Nie=C5=9Bcierowicz;Adam email;internet:[email protected] x-mozilla-html:TRUE version:2.1 end:vcard --------------76EB2DE500803A6F233D20CC--