Re: Obsolete documentation?

I wrote a SLIP documentation which shows how to setup a SLIP connection 
between an ELKS system running in QEMU und the host where QEMU is running. 
You could send data from the host to the ELKS system and vice versa. This is 
this document:
elks/Documentation/html/user/setup_slip.html
To me this seemed easier to set up instead of two ELKS systems connected 
with a cross-over serial cable.

Georg

-----Ursprüngliche Nachricht----- 
From: Marc-F. Lucca-Daniau
Sent: Sunday, February 16, 2020 6:05 PM
To: Paul Osmialowski ; Derek Johansen
Cc: ELKS
Subject: Re: Obsolete documentation?

Hello Derek and Paul,

ELKS is indeed still SLIP capable :
https://github.com/elks-org/elks/issues/304

One has just to change the command line of 'ktcp' to remove Ethernet and
put back SLIP.

Documentation is quite outdated. Georges made an effort to document
Ethernet and some other things while debugging networking features, but
there are still many legacy documents that need to be reorderer and updated.

Thanks,

MFLD


Le 16/02/2020 à 12:08, Paul Osmialowski a écrit :
> So what happened to SLIP support in ELKS? 8-bit ISA ethernet cards
> (with RJ-45 connector) are very rare (I have only one of them, work nicely
> under FreeDOS and in theory it should be supported by ELKS's ne2k driver,
> but it isn't). Within my one more XT machine to play with ELKS, serial
> port is the only means of external communication. PPP/IP or SLIP is
> something ELKS should definitely have IMHO.
>
> Cheers,
> Paul
>
> On Sat, 15 Feb 2020, Derek Johansen wrote:
>
>> Does elks/Documentation/text/networking_guide.txt make
>> elks/Documentation/text/networking.txt obsolete?  The latter in
>> Section 2 says ELKS only supports SLIP connections.  I don't think
>> this is still true?
>>