[PATCH v2 3/3] mailbox: pcc: Fix command timeout due to missed interrupt

From: Huisong Li <[email protected]>

PCC command execution can time out when a fast platform completes a
transaction and signals the platform interrupt before pcc_send_data()
marks the channel as in use. For shared platform interrupts, the type 3
handler uses chan_in_use to decide whether the interrupt belongs to the
channel. If it observes false, it ignores the completion and the caller
waits until timeout.

Publish chan_in_use before ringing the doorbell. Use WRITE_ONCE() for
the lockless flag updates and READ_ONCE() in the interrupt handler. The
following ordered I/O accessor orders the flag store before the platform
is notified.

Clear chan_in_use if ringing the doorbell fails. Otherwise, leave it set
until the interrupt handler completes the transaction, clearing it before
the mailbox core can submit another transfer.

Fixes: 3db174e478cb ("mailbox: pcc: Support shared interrupt for multiple subspaces")
Signed-off-by: Huisong Li <[email protected]>
Signed-off-by: Sudeep Holla <[email protected]>
---
 drivers/mailbox/pcc.c | 41 +++++++++++++++++++++++++++--------------
 1 file changed, 27 insertions(+), 14 deletions(-)

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 8dfa80b0a90f..9888dab64639 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -91,12 +91,11 @@ struct pcc_chan_reg {
  * @plat_irq: platform interrupt
  * @type: PCC subspace type
  * @plat_irq_flags: platform interrupt flags
- * @chan_in_use: this flag is used just to check if the interrupt needs
- *		handling when it is shared. Since only one transfer can occur
- *		at a time and mailbox takes care of locking, this flag can be
- *		accessed without a lock. Note: the type only support the
- *		communication from OSPM to Platform, like type3, use it, and
- *		other types completely ignore it.
+ * @chan_in_use: lockless flag used by type 3 initiator subspaces to filter
+ *		platform interrupts. Only one transfer can occur at a time, but
+ *		the interrupt handler may sample the flag on another CPU, so all
+ *		accesses must use READ_ONCE() or WRITE_ONCE(). Other subspace
+ *		types do not test it.
  */
 struct pcc_chan_info {
 	struct pcc_mbox_chan chan;
@@ -320,8 +319,13 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
 	if (pcc_chan_reg_read_modify_write(&pchan->plat_irq_ack))
 		return IRQ_NONE;
 
+	/*
+	 * Initiator subspaces use this flag to filter shared interrupts. Use
+	 * READ_ONCE() to sample the lockless flag written by pcc_send_data()
+	 * on another CPU.
+	 */
 	if (pchan->type == ACPI_PCCT_TYPE_EXT_PCC_MASTER_SUBSPACE &&
-	    !pchan->chan_in_use)
+	    !READ_ONCE(pchan->chan_in_use))
 		return IRQ_NONE;
 
 	if (!pcc_mbox_cmd_complete_check(pchan))
@@ -331,12 +335,12 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
 		return IRQ_NONE;
 
 	/*
-	 * Clear this flag after updating interrupt ack register and just
-	 * before mbox_chan_received_data() which might call pcc_send_data()
-	 * where the flag is set again to start new transfer. This is
-	 * required to avoid any possible race in updatation of this flag.
+	 * Clear this flag after updating the interrupt ack register and before
+	 * notifying the client and mailbox core. mbox_chan_txdone() may submit
+	 * the next queued transfer and set the flag again. Use WRITE_ONCE() for
+	 * the lockless update observed by the send and interrupt paths.
 	 */
-	pchan->chan_in_use = false;
+	WRITE_ONCE(pchan->chan_in_use, false);
 	mbox_chan_received_data(chan, NULL);
 	mbox_chan_txdone(chan, 0);
 
@@ -464,9 +468,18 @@ static int pcc_send_data(struct mbox_chan *chan, void *data)
 	if (ret)
 		return ret;
 
+	/*
+	 * Set chan_in_use before ringing the doorbell so a fast completion
+	 * interrupt is not mistaken for a shared interrupt from another
+	 * subspace. Use WRITE_ONCE() for the lockless flag update. The
+	 * ordered I/O accessor used to ring the doorbell orders this store
+	 * before the platform is notified.
+	 */
+	if (pchan->plat_irq > 0)
+		WRITE_ONCE(pchan->chan_in_use, true);
 	ret = pcc_chan_reg_read_modify_write(&pchan->db);
-	if (!ret && pchan->plat_irq > 0)
-		pchan->chan_in_use = true;
+	if (ret && pchan->plat_irq > 0)
+		WRITE_ONCE(pchan->chan_in_use, false);
 
 	return ret;
 }
-- 
2.43.0