Re: [PATCH v19 02/14] cxl/ras: Fix cxl_rch_get_aer_severity() wrong severity register

Alison Schofield <[email protected]> Mon, 3 Aug 2026 19:11:49 -0700

Newsgroups	org.kernel.vger.linux-acpi,org.kernel.vger.linux-cxl,org.kernel.vger.linux-doc,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pci
Message-ID	<[email protected]>

On Mon, Aug 03, 2026 at 05:17:58PM -0500, Terry Bowman wrote:
> cxl_rch_get_aer_severity() classifies RCH Downstream Port uncorrectable
> errors as fatal or non-fatal by ANDing uncorrectable status with
> PCI_ERR_ROOT_FATAL_RCV. This is wrong because PCI_ERR_ROOT_FATAL_RCV is a
> Root Error Status register bit (bit 6), not a severity bit. ANDing it
> against uncorrectable status tests a reserved bit and produces incorrect
> severity classification.
> 
> Fix by ANDing the unmasked uncor_status against uncor_severity. Per
> PCIe Base Spec r6.0 Section 7.8.4.4, each bit in the Uncorrectable
> Error Severity register indicates whether the corresponding error is
> fatal (1) or non-fatal (0).

Reviewed-by: Alison Schofield <[email protected]>