Re: Ethernet devide enumeration problems

Hi,

I've this problems too, but I was using initrd to load many modules to
work with AoE, I can't change the interface using udev :(, I use the
solution was rename the interfaces using ip command intro the initrd
after up the interfaces.

Thanks in advance,
--
Aslan Carlos de M. Ramos
Network Administrator
Mobile : +55(21)9989-4932
Skype  : aslancarlos

On Tue, 2007-08-07 at 00:28 -0300, Mauricio Silveira wrote:
> Hi,
> 
> I'm just updating this thread to post useful information.
> 
> I was unable to use ifrename to do the trick ...
> 
> I have upgraded the server to slackware 12, since the disk mirroring was 
> incomplete when slackware 12 was released, so I decided to rebuild the 
> raid array and install slackware 12 on it :)
> 
> Tuning the file "/etc/udev/rules.d/75-network-devices.rules" as needed 
> seems to solve the problem.
> I encourage everyone who uses slackware as you system to upgrade to v12 :)
> 
> Although I think samba 3.0.25b needs some "monitoring", got some strange 
> behavior from this version, downgrading brought everything back in place.
> 
> Thanks for all your help,
> 
> Mauricio
> 
> Mauricio Silveira wrote:
> > Hi all,
> >
> > I'm here asking for solutions for the Damned "Ethernet device 
> > enumeration" problem!
> >
> > I have a P5b Mobo for my office server, it has 2 integrated NICs, but 
> > the order for eth0/eth1 changes at each boot! It's getting me mad!
> >
> >
> > I'm using slackware 11.0, kernel 2.6.21.3.
> >
> > I know Suse and RHEL has a solution, but it integrates too many things 
> > to get it working under slackware.
> >
> > Any "easy"(not with so many dependencies) way?
> >
> >
> > Thanks,
> >
> > Mauricio
> 
--