Re: Swap RAID controllers

--nextPart5517215.Zyu8Yarigc
Content-Type: Text/Plain;
  charset="us-ascii"
Content-Transfer-Encoding: quoted-printable

Hi

On Sunday 10 July 2011 20:32:43 Dermot Paikkos wrote:
> I have a hardware RAID controller in a server and I strongly suspect it's
> faulty and causing the server to become un-responsive. I'd like to swap
> the controller to see if the problems goes away. I suspect that means I
> will loose the disk configuration. I don't expect a definite answer but
> does anyone know if I can simply swap the card (same manufacture, possibly
> different model) and it pick up the disk configuration?
>=20

It all depends - mainly on the hardware. *Usually* it should pick up the=20
disks.

If you have a spare part and a spare system you can test this, e.g. set-u p=
a=20
RAID and after shutting down the system swap the drives and see if it still=
=20
works.

What controller is it?

Cheers

Carsten

--nextPart5517215.Zyu8Yarigc
Content-Type: application/pgp-signature; name=signature.asc 
Content-Description: This is a digitally signed message part.

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iEYEABECAAYFAk4Z/IkACgkQvfAZOV3797y1BQCfapj3MyIYSLNIDzHkWELx3+On
z+QAoLEJ2JwLkrFDvfrKKCGmMvv5xaRE
=AGz/
-----END PGP SIGNATURE-----

--nextPart5517215.Zyu8Yarigc--