[PATCH v6 2/4] regulator: qcom-rpmh: Fix PMIC5 BOB bypass mode handling

Currently, when `rpmh_regulator_set_mode_bypass()` helper function
is called to set bypass mode, it sends PMIC4's BOB bypass mode
value for even if its a PMIC5 BOB.

To fix this, introduce new hw_data parameter`pmic_bypass_mode`
to store bypass mode value. Use it to send correct PMIC bypass
mode value that corresponds to PMIC4/5 BOB regulators from the
helper function.

Fixes: 610f29e5cc0e8d58 ("regulator: qcom-rpmh: Update PMIC modes for PMIC5")
Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Kamal Wadhwa <[email protected]>
---
 drivers/regulator/qcom-rpmh-regulator.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 756a4201225e..c47dc9f92279 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -111,6 +111,7 @@ static const struct resource_name_formats vreg_rsc_name_lookup[NUM_REGULATOR_TYP
  * @hpm_min_load_uA:		Minimum load current in microamps that requires
  *				high power mode (HPM) operation.  This is used
  *				for LDO hardware type regulators only.
+ * @pmic_bypass_mode:		The PMIC bypass mode value.
  * @pmic_mode_map:		Array indexed by regulator framework mode
  *				containing PMIC hardware modes.  Must be large
  *				enough to index all framework modes supported
@@ -125,6 +126,7 @@ struct rpmh_vreg_hw_data {
 	int					n_linear_ranges;
 	int					n_voltages;
 	int					hpm_min_load_uA;
+	int					pmic_bypass_mode;
 	const int				*pmic_mode_map;
 	unsigned int			      (*of_map_mode)(unsigned int mode);
 };
@@ -311,7 +313,7 @@ static int rpmh_regulator_vrm_set_mode_bypass(struct rpmh_vreg *vreg,
 		return pmic_mode;
 
 	if (bypassed)
-		cmd.data = PMIC4_BOB_MODE_PASS;
+		cmd.data = vreg->hw_data->pmic_bypass_mode;
 	else
 		cmd.data = pmic_mode;
 
@@ -767,6 +769,7 @@ static const struct rpmh_vreg_hw_data pmic4_bob = {
 	},
 	.n_linear_ranges = 1,
 	.n_voltages = 84,
+	.pmic_bypass_mode = PMIC4_BOB_MODE_PASS,
 	.pmic_mode_map = pmic_mode_map_pmic4_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
@@ -975,6 +978,7 @@ static const struct rpmh_vreg_hw_data pmic5_bob = {
 	},
 	.n_linear_ranges = 1,
 	.n_voltages = 32,
+	.pmic_bypass_mode = PMIC5_BOB_MODE_PASS,
 	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };

-- 
2.43.0