[PATCH 27/28] arm64: dts: qcom: sa8155p-adp: Fix swapped USB and UFS QMP PHY vdda-phy/vdda-pll supplies

From: Manivannan Sadhasivam <[email protected]>

The QMP PHY expects the vdda-phy supply to be around 0.88V and the
vdda-pll supply to be 1.2V. But these two supplies are swapped for the
USB and UFS QMP PHYs on this board, feeding 1.2V to vdda-phy and 0.9V to
vdda-pll.

Fix it by swapping the two supplies back.

Fixes: 12dd4ebda47a ("arm64: dts: qcom: Fix usb entries for SA8155p adp board")
Fixes: 5b85e8f2225c ("arm64: dts: qcom: sa8155p-adp: Add base dts file")
Reported-by: Konrad Dybcio <[email protected]>
Assisted-by: Claude:opus-4-8
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
 arch/arm64/boot/dts/qcom/sa8155p-adp.dts | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
index 388d5ecee949..3e22ee8b5092 100644
--- a/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8155p-adp.dts
@@ -428,8 +428,8 @@ &ufs_mem_hc {
 &ufs_mem_phy {
 	status = "okay";
 
-	vdda-phy-supply = <&vreg_l8c_1p2>;
-	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
 };
 
 &usb_1 {
@@ -474,8 +474,8 @@ &usb_2_hsphy {
 
 &usb_2_qmpphy {
 	status = "okay";
-	vdda-phy-supply = <&vreg_l8c_1p2>;
-	vdda-pll-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-phy-supply = <&vdda_usb_ss_dp_core_1>;
+	vdda-pll-supply = <&vreg_l8c_1p2>;
 };
 
 &pcie0 {

-- 
2.43.0