[PATCH v3 0/3] ASoC: qcom: allow SM[456]50 HDK board to play audio via I2S

Following [1], this adds the necessary settings to setup
the I2S link to the HDMI bridge to allow audio playback.

All dependencies are merges into sound.git for-7.3

[1] https://lore.kernel.org/all/[email protected]/

Signed-off-by: Neil Armstrong <[email protected]>
---
Changes in v3:
- Fixed node unit number on patch 3
- Link to v2: https://patch.msgid.link/[email protected]

Changes in v2:
- Dropped applied patch 1
- Fixed node unit number
- Reversed clock names order to respect bindings
- Link to v1: https://patch.msgid.link/[email protected]

---
Neil Armstrong (3):
      arm64: dts: qcom: sm8450-hdk: Enable I2S for HDMI
      arm64: dts: qcom: sm8550-hdk: Enable I2S for HDMI
      arm64: dts: qcom: sm8650-hdk: Enable I2S for HDMI

 arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 36 +++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8450.dtsi    | 40 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 36 +++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8550.dtsi    | 73 +++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 35 +++++++++++++++-
 arch/arm64/boot/dts/qcom/sm8650.dtsi    | 40 ++++++++++++++++++
 6 files changed, 257 insertions(+), 3 deletions(-)
---
base-commit: c50ed4627e333934aaf0473a822169786c83dce5
change-id: 20260728-topic-sm8x50-next-hdk-i2s-6d63c25eceac

Best regards,
--  
Neil Armstrong <[email protected]>