Re: [PATCH 1/4] dt-bindings: media: i2c: Add Sony IMX471 CMOS Image Sensor

Sakari Ailus <[email protected]>
Newsgroups org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-media
Organization Intel Finland Oy - BIC 0357606-4 - c/o Alberga Business Park, 6 krs, Bertel Jungin Aukio 5, 02600 Espoo
Message-ID <[email protected]>
Hi Danila,

Thanks for the set.

On Wed, Aug 05, 2026 at 10:54:24PM +0300, Danila Tikhonov wrote:
> Document the Sony IMX471 CMOS Image Sensor.
> 
> Signed-off-by: Danila Tikhonov <[email protected]>
> ---
>  .../devicetree/bindings/media/i2c/sony,imx471.yaml | 123 +++++++++++++++++++++
>  1 file changed, 123 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> new file mode 100644
> index 000000000000..9c6c7c55746f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/sony,imx471.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/i2c/sony,imx471.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sony IMX471 CMOS Image Sensor
> +
> +maintainers:
> +  - Danila Tikhonov <[email protected]>
> +
> +description: |-

I believe you can drop ' |-'.

> +  The Sony IMX471 is a diagonal 5.822 mm (Type 1/3.09) 16-megapixel
> +  back-illuminated stacked CMOS active pixel image sensor with a 4656 x 3496
> +  active pixel array and 1.0 um square pixels. It uses a Quad Bayer color filter
> +  array, is programmable through an I2C interface, and outputs image data
> +  through MIPI CSI-2.
> +
> +allOf:
> +  - $ref: /schemas/media/video-interface-devices.yaml#
> +
> +properties:
> +  compatible:
> +    const: sony,imx471
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    description: External input clock (19.2 MHz)
> +    maxItems: 1
> +
> +  vana-supply:
> +    description: Analog power supply (2.8 V)
> +
> +  vdig-supply:
> +    description: Digital core power supply (1.05 V)
> +
> +  vif-supply:
> +    description: I/O interface power supply (1.8 V)
> +
> +  reset-gpios:
> +    description: Sensor reset (XCLR) GPIO
> +    maxItems: 1
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/$defs/port-base
> +    unevaluatedProperties: false
> +
> +    properties:
> +      endpoint:
> +        $ref: /schemas/media/video-interfaces.yaml#
> +        unevaluatedProperties: false
> +
> +        properties:
> +          data-lanes:
> +            items:
> +              - const: 1
> +              - const: 2
> +              - const: 3
> +              - const: 4

The sensor also supports two-lane operation.

> +
> +          link-frequencies:
> +            maxItems: 1
> +            items:
> +              const: 200000000

The sensor isn't limited to 200 MHz, is it? I just wouldn't specify it at
all.

> +
> +        required:
> +          - data-lanes
> +          - link-frequencies
> +
> +    required:
> +      - endpoint
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - vana-supply
> +  - vdig-supply
> +  - vif-supply
> +  - port
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,camcc-sc7280.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        camf_imx471: camera@1a {
> +            compatible = "sony,imx471";
> +            reg = <0x1a>;
> +
> +            vana-supply = <&vreg_camf_vana_2p8>;
> +            vdig-supply = <&vreg_camf_vdig_1p1>;
> +            vif-supply = <&vreg_cam_vio_1p8>;
> +
> +            clocks = <&camcc CAM_CC_MCLK0_CLK>;
> +            assigned-clocks = <&camcc CAM_CC_MCLK0_CLK>;
> +            assigned-clock-rates = <19200000>;
> +
> +            reset-gpios = <&tlmm 20 GPIO_ACTIVE_LOW>;
> +            pinctrl-0 = <&cam_mclk0_default>;
> +            pinctrl-names = "default";
> +
> +            orientation = <0>;
> +            rotation = <270>;
> +
> +            port {
> +                camera_imx471_ep: endpoint {
> +                    data-lanes = <1 2 3 4>;
> +                    link-frequencies = /bits/ 64 <200000000>;
> +                    remote-endpoint = <&csiphy0_ep>;
> +                };
> +            };
> +        };
> +    };
> +...
> 

-- 
Regards,

Sakari Ailus
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.