[PATCH 2/2] arm64: dts: qcom: purwa-iot-evk: Add eDP display overlay

Move the eDP panel configuration and related power, backlight, and pinctrl
nodes into a separate overlay. Keep the base DTB suitable for headless
variants and provide a composite DTB for headed variants.

Signed-off-by: Anand Tiwari <[email protected]>
---
 arch/arm64/boot/dts/qcom/Makefile               |   3 +
 arch/arm64/boot/dts/qcom/purwa-iot-evk-edp.dtso | 126 ++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/purwa-iot-evk.dts      | 107 --------------------
 3 files changed, 129 insertions(+), 107 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index bb0da34983c8..fc954da58402 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -165,6 +165,9 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= purwa-iot-evk.dtb
 
+purwa-iot-evk-edp-dtbs	:= purwa-iot-evk.dtb purwa-iot-evk-edp.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= purwa-iot-evk-edp.dtb
+
 purwa-iot-evk-el2-dtbs	:= purwa-iot-evk.dtb x1-el2.dtbo
 
 dtb-$(CONFIG_ARCH_QCOM)	+= purwa-iot-evk-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/purwa-iot-evk-edp.dtso b/arch/arm64/boot/dts/qcom/purwa-iot-evk-edp.dtso
new file mode 100644
index 000000000000..759d05342627
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/purwa-iot-evk-edp.dtso
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_bl_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&tlmm {
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
index ad503beec1d3..6dde925025dd 100644
--- a/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
+++ b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
@@ -19,16 +19,6 @@ aliases {
 		serial1 = &uart14;
 	};
 
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pmk8550_pwm 0 5000000>;
-		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vreg_edp_bl>;
-
-		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
-		pinctrl-names = "default";
-	};
-
 	wcd938x: audio-codec {
 		compatible = "qcom,wcd9385-codec";
 
@@ -205,38 +195,6 @@ pmic_glink_ss2_con_sbu_in: endpoint {
 		};
 	};
 
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_edp_bl: regulator-edp-bl {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VBL9";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_bl_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
 	vreg_nvme: regulator-nvme {
 		compatible = "regulator-fixed";
 
@@ -962,44 +920,6 @@ &mdss_dp2_out {
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
-&mdss_dp3 {
-	/delete-property/ #sound-dai-cells;
-
-	pinctrl-0 = <&edp0_hpd_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "edp-panel";
-
-			backlight = <&backlight>;
-			power-supply = <&vreg_edp_3p3>;
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-};
-
-&mdss_dp3_out {
-	data-lanes = <0 1 2 3>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-	remote-endpoint = <&edp_panel_in>;
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
 &pcie3_port0 {
 	vpcie12v-supply = <&vreg_pcie_12v>;
 	vpcie3v3-supply = <&vreg_pcie_3v3>;
@@ -1128,19 +1048,6 @@ led@2 {
 };
 
 &pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <1>;
-		input-disable;
-		output-enable;
-	};
-
-	edp_bl_reg_en: edp-bl-reg-en-state {
-		pins = "gpio10";
-		function = "normal";
-	};
-
 	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
 		pins = "gpio8";
 		function = "normal";
@@ -1169,13 +1076,6 @@ usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
 	};
 };
 
-&pmk8550_gpios {
-	edp_bl_pwm: edp-bl-pwm-state {
-		pins = "gpio5";
-		function = "func3";
-	};
-};
-
 &pmk8550_pwm {
 	status = "okay";
 };
@@ -1326,13 +1226,6 @@ right_tweeter: speaker@0,1 {
 };
 
 &tlmm {
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
 	eusb3_reset_n: eusb3-reset-n-state {
 		pins = "gpio6";
 		function = "gpio";

-- 
2.54.0