[PATCH 5/5] arm64: dts: qcom: qcs6490-thundercomm-minipc-g1iot: clean up PCI function nodes

The Thundercomm AI Mini PC G1 IoT devicetree source file defines a node
representing a TC956x chip which contains a PCIe switch and an embedded
endpoint that implements two PCIe functions.

The devicetree nodes erroneously include a "pci" device_type property
for the two PCIe functions.  That property should only be used for a
PCI device "that implements a PCI bus".  Remove this property for the
two function nodes.

In addition, these nodes define #address-cells, #size-cells, and ranges
properties, which are not normally defined for PCIe endpoints.  Remove
properties as well; they can be added back once they are actually
needed/used.

Fixes: 1cde54c54b83b ("arm64: dts: qcom: qcs6490: Add Thundercomm AI Mini PC G1 IoT")
Signed-off-by: Alex Elder <[email protected]>
---
 .../boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts    | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts
index 31bafa2cf51db..3e8d144f57b00 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-thundercomm-minipc-g1iot.dts
@@ -792,18 +792,10 @@ pcie@3,0 {
 
 			pcie@0,0 {
 				reg = <0x50000 0x0 0x0 0x0 0x0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges;
 			};
 
 			pcie@0,1 {
 				reg = <0x50100 0x0 0x0 0x0 0x0>;
-				#address-cells = <3>;
-				#size-cells = <2>;
-				device_type = "pci";
-				ranges;
 			};
 		};
 	};
-- 
2.53.0