[PATCH v6 0/5] arm64: dts: qcom: Add Kalambo SoC and CRD

Qualcomm Kalambo SoC is derived from Mahua SoC with CPU cluster 0
removed,leaving only cluster 1 present.

This series documents the board compatibles and adds the SoC and
Compute Reference Device (CRD) device trees. It also adds the Kalambo
compatible to the UBWC configuration table and allowlists the Kalambo
CRD for QSEECOM to enable access to efivars.

---
Changes in v6:
- Add the QREF and refgen regulator supplies to the Kalambo CRD TCSR node.
- Drop Konrad Dybcio's Reviewed-by tag because the patch has changed.
- Rebased on next-20260807.
- Link to v5: https://patch.msgid.link/[email protected]

Changes in v5:
- Split PDC ranges at 130, 147 and 171 to skip pins 134, 138, 156, 158,
  172, 181 and 202, which carry gp_irq_hvm inputs with nothing wired to
  them on Kalambo. Reported by Konrad.
- Reword the commit message to describe the PDC difference.
- Picked up R-b tags.
- Link to v4: https://patch.msgid.link/[email protected]

Changes in v4:
- Split PDC range <108 619 22> into <108 619 1> and <111 622 19> to skip
  unconnected pins 109 and 110 on Kalambo. All other PDC ranges match Glymur.
- Rebased on next-20260729.
- Link to v3: https://patch.msgid.link/[email protected]

Changes in v3:
- Delete and redefine the whole cpu-map via the /cpus label.
- pdp0_mbox: one reg entry per line and use '0x0' instead of '0'.
- Rebased on next-20260726.
- Picked up R-b tags.
- Link to v2: https://patch.msgid.link/[email protected]

Changes in v2:
- Fix the cpu-map and SCMI perf domain for the single cluster.
- Give the SCP shared-memory window its own IMEM section.
- Rebased on next-20260721.
- Picked up R-b tags.
- Link to v1: https://patch.msgid.link/[email protected]

---
Gopikrishna Garmidi (5):
      dt-bindings: arm: qcom: Document Kalambo SoC and board
      arm64: dts: qcom: Add Kalambo SoC
      arm64: dts: qcom: Add Kalambo CRD
      firmware: qcom: scm: Allow QSEECOM on Kalambo CRD
      soc: qcom: ubwc: Add Kalambo UBWC config

 Documentation/devicetree/bindings/arm/qcom.yaml |   5 +
 arch/arm64/boot/dts/qcom/Makefile               |   1 +
 arch/arm64/boot/dts/qcom/glymur.dtsi            |   4 +-
 arch/arm64/boot/dts/qcom/kalambo-crd.dts        |  37 ++++++++
 arch/arm64/boot/dts/qcom/kalambo.dtsi           | 119 ++++++++++++++++++++++++
 drivers/firmware/qcom/qcom_scm.c                |   1 +
 drivers/soc/qcom/ubwc_config.c                  |   1 +
 7 files changed, 166 insertions(+), 2 deletions(-)
---
base-commit: 6b8c8af514d739d0335f5579b585e02babe8a727
change-id: 20260715-b4-kalambo-crd-86912a03bbd2

Best regards,
--  
Gopikrishna Garmidi <[email protected]>