Re: [PATCH v4] Bluetooth: btintel: Add Bluetooth SAR revision 2 support

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <[email protected]>:

On Thu, 23 Jul 2026 06:43:32 +0530 you wrote:
> BRDS revision 2 introduces per-chain (Chain A and Chain B) TX power
> limits across five sub-bands (2.4G, 5.2G, 5.8/5.9G, 6G-low, 6G-high),
> replacing the single-chain per-modulation model of revisions 0 and 1.
> 
> - Add btintel_set_sar_rev2() which sends the full Rev2 DDC sequence:
>     0x019e  inc-power-mode enable flag        (1 byte)
>     0x0311  2.4 GHz sub-band limits           (2 bytes)
>     0x0312  5.2 GHz sub-band limits           (2 bytes)
>     0x0313  5.8/5.9 GHz sub-band limits       (2 bytes)
>     0x0314  5.8/5.9 GHz sub-band limits again (2 bytes, duplicate FW reg)
>     0x0315  6 GHz low sub-band limits         (2 bytes)
>     0x0316  6 GHz high sub-band limits        (2 bytes)
>   followed by the SAR-init-complete command (0xfe25).
> 
> [...]

Here is the summary with links:
  - [v4] Bluetooth: btintel: Add Bluetooth SAR revision 2 support
    https://git.kernel.org/bluetooth/bluetooth-next/c/1b16c012931d

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html