[PATCH] Bluetooth: btusb: Add Realtek RTL8821CE device 13d3:3558
Richard Nunley via B4 Relay <[email protected]>
| Newsgroups | org.kernel.vger.linux-bluetooth,org.kernel.feeds.b4-sent,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
From: Richard Nunley <[email protected]> The IMC Networks Bluetooth controller with USB ID 13d3:3558 uses an RTL8821CE. Without BTUSB_REALTEK, btusb uses generic initialization and does not load the controller firmware. BLE connections then fail before pairing with HCI error 0x3e. Add the device ID to the RTL8821CE table. This enables loading rtl_bt/rtl8821c_fw.bin and rtl_bt/rtl8821c_config.bin, after which a BLE HID keyboard pairs successfully. Signed-off-by: Richard Nunley <[email protected]> --- Tested on a CachyOS 7.1.6 kernel with BlueZ 5.87 and a Corsair K65 Plus BLE keyboard. --- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index be82bbbc1..2bae85b00 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -509,6 +509,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3533), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3558), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8822CE Bluetooth devices */ { USB_DEVICE(0x0bda, 0xb00c), .driver_info = BTUSB_REALTEK | --- base-commit: 43a556b2fd43f2df6dded59c2e26560a27874c24 change-id: 20260809-master-aecb893ecf35 Best regards, -- Richard Nunley <[email protected]>