[PATCH v15 07/11] can: bcm: validate frame length in bcm_rx_setup() for RTR replies

From: Oliver Hartkopp <[email protected]>

bcm_tx_setup() validates cf->len against the CAN/CAN FD DLC limits
before installing frames for TX_SETUP, but bcm_rx_setup() never did
the same for the RTR-reply frame configured via RX_SETUP with
RX_RTR_FRAME.

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Signed-off-by: Oliver Hartkopp <[email protected]>
---
 net/can/bcm.c | 59 +++++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 41 insertions(+), 18 deletions(-)

diff --git a/net/can/bcm.c b/net/can/bcm.c
index 68a62f605432..2d9c9cd74536 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1244,26 +1244,41 @@ static int bcm_tx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		kfree(op->frames);
 	kfree(op);
 	return err;
 }
 
-static void bcm_rx_setup_rtr_check(struct bcm_msg_head *msg_head,
-				   struct bcm_op *op, void *new_frames)
+static int bcm_rx_setup_rtr_check(struct bcm_msg_head *msg_head,
+				  struct bcm_op *op, void *new_frames)
 {
+	struct canfd_frame *frame0 = new_frames;
+
+	if (!(msg_head->flags & RX_RTR_FRAME))
+		return 0;
+
+	/* this frame is sent out as-is by bcm_can_tx() whenever a matching
+	 * remote request is received, so validate its length the same way
+	 * bcm_tx_setup() validates TX_SETUP frames before installing it
+	 */
+	if (msg_head->flags & CAN_FD_FRAME) {
+		if (frame0->len > 64)
+			return -EINVAL;
+	} else {
+		if (frame0->len > 8)
+			return -EINVAL;
+	}
+
 	/* funny feature in RX(!)_SETUP only for RTR-mode:
 	 * copy can_id into frame BUT without RTR-flag to
 	 * prevent a full-load-loopback-test ... ;-]
 	 * normalize this on the staged buffer, before it is
 	 * ever installed into op->frames.
 	 */
-	if (msg_head->flags & RX_RTR_FRAME) {
-		struct canfd_frame *frame0 = new_frames;
+	if ((msg_head->flags & TX_CP_CAN_ID) ||
+	    frame0->can_id == op->can_id)
+		frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
 
-		if ((msg_head->flags & TX_CP_CAN_ID) ||
-		    frame0->can_id == op->can_id)
-			frame0->can_id = op->can_id & ~CAN_RTR_FLAG;
-	}
+	return 0;
 }
 
 /*
  * bcm_rx_setup - create or update a bcm rx op (for bcm_sendmsg)
  */
@@ -1322,11 +1337,15 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 			if (err < 0) {
 				kfree(new_frames);
 				return err;
 			}
 
-			bcm_rx_setup_rtr_check(msg_head, op, new_frames);
+			err = bcm_rx_setup_rtr_check(msg_head, op, new_frames);
+			if (err < 0) {
+				kfree(new_frames);
+				return err;
+			}
 		}
 
 		spin_lock_bh(&op->bcm_rx_update_lock);
 		op->nframes = msg_head->nframes;
 		op->flags = msg_head->flags;
@@ -1395,20 +1414,16 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		}
 
 		if (msg_head->nframes) {
 			err = memcpy_from_msg(op->frames, msg,
 					      msg_head->nframes * op->cfsiz);
-			if (err < 0) {
-				if (op->frames != &op->sframe)
-					kfree(op->frames);
-				if (op->last_frames != &op->last_sframe)
-					kfree(op->last_frames);
-				kfree(op);
-				return err;
-			}
+			if (err < 0)
+				goto free_op;
 
-			bcm_rx_setup_rtr_check(msg_head, op, op->frames);
+			err = bcm_rx_setup_rtr_check(msg_head, op, op->frames);
+			if (err < 0)
+				goto free_op;
 		}
 
 		/* bcm_can_tx / bcm_tx_timeout_handler needs this */
 		op->sk = sk;
 		sock_hold(sk);
@@ -1503,10 +1518,18 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg,
 		/* add this bcm_op to the list of the rx_ops */
 		list_add_rcu(&op->list, &bo->rx_ops);
 	}
 
 	return msg_head->nframes * op->cfsiz + MHSIZ;
+
+free_op:
+	if (op->frames != &op->sframe)
+		kfree(op->frames);
+	if (op->last_frames != &op->last_sframe)
+		kfree(op->last_frames);
+	kfree(op);
+	return err;
 }
 
 /*
  * bcm_tx_send - send a single CAN frame to the CAN interface (for bcm_sendmsg)
  */

-- 
2.53.0