[PATCH v3 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S

From: Claudiu Beznea <[email protected]>

Hi,

Series adds CAN support for the Renesas RZ/G3S SoC. Along with it a typo
fix patch was added on the CAN driver.

Thank you,
Claudiu

Changes in v3:
- addressed sashiko review comments

Changes in v2:
- collected tags
- addressed sashiko review comments

Claudiu Beznea (8):
  clk: r9a08g045-cpg: Add clocks and resets for CAN-FD
  dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
  can: rcar_canfd: Fix typos in macro names
  can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
  can: rcar_canfd: Do not set registers selecting the CAN mode
  can: rcar_canfd: Add support for Renesas RZ/G3S
  arm64: dts: renesas: r9a08g045: Add CAN-FD node
  arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD

 .../bindings/net/can/renesas,rcar-canfd.yaml  | 20 +++++-
 arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 39 +++++++++++
 .../boot/dts/renesas/rzg3s-smarc-switches.h   | 12 ++++
 arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 46 +++++++++++++
 drivers/clk/renesas/r9a08g045-cpg.c           |  9 +++
 drivers/net/can/rcar/rcar_canfd.c             | 65 +++++++++++++++----
 6 files changed, 178 insertions(+), 13 deletions(-)

-- 
2.43.0