[PATCH] can: kvaser_usb: Fix memory leak in kvaser_usb_hydra_get_busparams()

The memory allocated for cmd is not freed after the call to
kvaser_usb_send_cmd() in both the normal and error paths.
Fix that by adding a kfree() immediately after the call.

Fixes: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming")
Cc: [email protected]
Signed-off-by: Abdun Nihaal <[email protected]>
---
Compile tested only. Issue found using static analysis.

 drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
index e09d663e362f..efbb7bed34c9 100644
--- a/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
+++ b/drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c
@@ -1626,6 +1626,7 @@ static int kvaser_usb_hydra_get_busparams(struct kvaser_usb_net_priv *priv,
 	reinit_completion(&priv->get_busparams_comp);
 
 	err = kvaser_usb_send_cmd(dev, cmd, cmd_len);
+	kfree(cmd);
 	if (err)
 		return err;
 
-- 
2.43.0