[PATCH net 06/20] can: ctucanfd: mark error-active controller status valid

From: Avi Weiss <[email protected]>

In the CAN_STATE_ERROR_ACTIVE case, cf->data[1] is set to
CAN_ERR_CRTL_ACTIVE, but cf->can_id is not set with CAN_ERR_CRTL in
that path.

Set CAN_ERR_CRTL so consumers know the controller-status information
in cf->data[1] is valid.

Fixes: 9bd24927e3ee ("can: ctucanfd: handle skb allocation failure")
Signed-off-by: Avi Weiss <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: [email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
---
 drivers/net/can/ctucanfd/ctucanfd_base.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c
index 0ea1ff28dfce..8f8b1c097ec6 100644
--- a/drivers/net/can/ctucanfd/ctucanfd_base.c
+++ b/drivers/net/can/ctucanfd/ctucanfd_base.c
@@ -869,7 +869,7 @@ static void ctucan_err_interrupt(struct net_device *ndev, u32 isr)
 			break;
 		case CAN_STATE_ERROR_ACTIVE:
 			if (skb) {
-				cf->can_id |= CAN_ERR_CNT;
+				cf->can_id |= CAN_ERR_CRTL | CAN_ERR_CNT;
 				cf->data[1] = CAN_ERR_CRTL_ACTIVE;
 				cf->data[6] = bec.txerr;
 				cf->data[7] = bec.rxerr;
-- 
2.53.0