[PATCH net 07/20] can: ctucanfd: handle bus error interrupts

From: Avi Weiss <[email protected]>

Include REG_INT_STAT_BEI in the top-level error interrupt condition.

BEI is enabled when CAN_CTRLMODE_BERR_REPORTING is requested and
ctucan_err_interrupt() already handles it. Without checking and
clearing BEI in the top-level handler, bus error interrupts are not
handled or acknowledged.

Fixes: 2dcb8e8782d8 ("can: ctucanfd: add support for CTU CAN FD open-source IP core - bus independent part.")
Signed-off-by: Avi Weiss <[email protected]>
Acked-by: Pavel Pisa <[email protected]>
Link: https://patch.msgid.link/[email protected]
Cc: [email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
---
 drivers/net/can/ctucanfd/ctucanfd_base.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/ctucanfd/ctucanfd_base.c b/drivers/net/can/ctucanfd/ctucanfd_base.c
index 8f8b1c097ec6..10ebcc13ea65 100644
--- a/drivers/net/can/ctucanfd/ctucanfd_base.c
+++ b/drivers/net/can/ctucanfd/ctucanfd_base.c
@@ -1136,8 +1136,12 @@ static irqreturn_t ctucan_interrupt(int irq, void *dev_id)
 		/* Error interrupts */
 		if (FIELD_GET(REG_INT_STAT_EWLI, isr) ||
 		    FIELD_GET(REG_INT_STAT_FCSI, isr) ||
-		    FIELD_GET(REG_INT_STAT_ALI, isr)) {
-			icr = isr & (REG_INT_STAT_EWLI | REG_INT_STAT_FCSI | REG_INT_STAT_ALI);
+		    FIELD_GET(REG_INT_STAT_ALI, isr) ||
+		    FIELD_GET(REG_INT_STAT_BEI, isr)) {
+			icr = isr & (REG_INT_STAT_EWLI |
+				     REG_INT_STAT_FCSI |
+				     REG_INT_STAT_ALI |
+				     REG_INT_STAT_BEI);
 
 			ctucan_netdev_dbg(ndev, "some ERR interrupt: clearing 0x%08x\n", icr);
 			ctucan_write32(priv, CTUCANFD_INT_STAT, icr);
-- 
2.53.0