Re: [PATCH v3 0/8] can: rcar_canfd: Add support for Renesas RZ/G3S

Hi,

Gentle ping on this series.

Thank you,
Claudiu

On 7/14/26 20:33, Claudiu Beznea wrote:
> From: Claudiu Beznea <[email protected]>
> 
> Hi,
> 
> Series adds CAN support for the Renesas RZ/G3S SoC. Along with it a typo
> fix patch was added on the CAN driver.
> 
> Thank you,
> Claudiu
> 
> Changes in v3:
> - addressed sashiko review comments
> 
> Changes in v2:
> - collected tags
> - addressed sashiko review comments
> 
> Claudiu Beznea (8):
>    clk: r9a08g045-cpg: Add clocks and resets for CAN-FD
>    dt-bindings: can: renesas,rcar-canfd: Document RZ/G3S SoC
>    can: rcar_canfd: Fix typos in macro names
>    can: rcar_canfd: Allow the CAN FD clock to be sourced from fck
>    can: rcar_canfd: Do not set registers selecting the CAN mode
>    can: rcar_canfd: Add support for Renesas RZ/G3S
>    arm64: dts: renesas: r9a08g045: Add CAN-FD node
>    arm64: dts: renesas: rzg3s-smarc: Enable CAN-FD
> 
>   .../bindings/net/can/renesas,rcar-canfd.yaml  | 20 +++++-
>   arch/arm64/boot/dts/renesas/r9a08g045.dtsi    | 39 +++++++++++
>   .../boot/dts/renesas/rzg3s-smarc-switches.h   | 12 ++++
>   arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi  | 46 +++++++++++++
>   drivers/clk/renesas/r9a08g045-cpg.c           |  9 +++
>   drivers/net/can/rcar/rcar_canfd.c             | 65 +++++++++++++++----
>   6 files changed, 178 insertions(+), 13 deletions(-)
>