From: Ming Yu <[email protected]>
Move NCT6694_XXX_MOD macro definitions from individual sub-device
drivers into the shared header include/linux/mfd/nct6694.h.
This is a prerequisite for supporting multiple transport interfaces
(USB, HIF) without duplicating these definitions.
No functional change.
Signed-off-by: Ming Yu <[email protected]>
---
Changes in v7:
Changes in v6:
Changes in v5:
- Split from the monolithic v4 patch to follow the single logical change
principle.
drivers/gpio/gpio-nct6694.c | 7 -------
drivers/hwmon/nct6694-hwmon.c | 21 ---------------------
drivers/i2c/busses/i2c-nct6694.c | 7 -------
drivers/net/can/usb/nct6694_canfd.c | 6 ------
drivers/rtc/rtc-nct6694.c | 7 -------
drivers/watchdog/nct6694_wdt.c | 7 -------
include/linux/mfd/nct6694.h | 9 +++++++++
7 files changed, 9 insertions(+), 55 deletions(-)
diff --git a/drivers/gpio/gpio-nct6694.c b/drivers/gpio/gpio-nct6694.c
index a8607f0d9915..53bfc5983648 100644
--- a/drivers/gpio/gpio-nct6694.c
+++ b/drivers/gpio/gpio-nct6694.c
@@ -13,13 +13,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-/*
- * USB command module type for NCT6694 GPIO controller.
- * This defines the module type used for communication with the NCT6694
- * GPIO controller over the USB interface.
- */
-#define NCT6694_GPIO_MOD 0xFF
-
#define NCT6694_GPIO_VER 0x90
#define NCT6694_GPIO_VALID 0x110
#define NCT6694_GPI_DATA 0x120
diff --git a/drivers/hwmon/nct6694-hwmon.c b/drivers/hwmon/nct6694-hwmon.c
index 6dcf22ca5018..581451875f2c 100644
--- a/drivers/hwmon/nct6694-hwmon.c
+++ b/drivers/hwmon/nct6694-hwmon.c
@@ -15,13 +15,6 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
-/*
- * USB command module type for NCT6694 report channel
- * This defines the module type used for communication with the NCT6694
- * report channel over the USB interface.
- */
-#define NCT6694_RPT_MOD 0xFF
-
/* Report channel */
/*
* The report channel is used to report the status of the hardware monitor
@@ -38,13 +31,6 @@
#define NCT6694_TIN_STS(x) (0x6A + (x))
#define NCT6694_FIN_STS(x) (0x6E + (x))
-/*
- * USB command module type for NCT6694 HWMON controller.
- * This defines the module type used for communication with the NCT6694
- * HWMON controller over the USB interface.
- */
-#define NCT6694_HWMON_MOD 0x00
-
/* Command 00h - Hardware Monitor Control */
#define NCT6694_HWMON_CONTROL 0x00
#define NCT6694_HWMON_CONTROL_SEL 0x00
@@ -53,13 +39,6 @@
#define NCT6694_HWMON_ALARM 0x02
#define NCT6694_HWMON_ALARM_SEL 0x00
-/*
- * USB command module type for NCT6694 PWM controller.
- * This defines the module type used for communication with the NCT6694
- * PWM controller over the USB interface.
- */
-#define NCT6694_PWM_MOD 0x01
-
/* PWM Command - Manual Control */
#define NCT6694_PWM_CONTROL 0x01
#define NCT6694_PWM_CONTROL_SEL 0x00
diff --git a/drivers/i2c/busses/i2c-nct6694.c b/drivers/i2c/busses/i2c-nct6694.c
index 1413ab6f9462..ef3329f34246 100644
--- a/drivers/i2c/busses/i2c-nct6694.c
+++ b/drivers/i2c/busses/i2c-nct6694.c
@@ -12,13 +12,6 @@
#include <linux/module.h>
#include <linux/platform_device.h>
-/*
- * USB command module type for NCT6694 I2C controller.
- * This defines the module type used for communication with the NCT6694
- * I2C controller over the USB interface.
- */
-#define NCT6694_I2C_MOD 0x03
-
/* Command 00h - I2C Deliver */
#define NCT6694_I2C_DELIVER 0x00
#define NCT6694_I2C_DELIVER_SEL 0x00
diff --git a/drivers/net/can/usb/nct6694_canfd.c b/drivers/net/can/usb/nct6694_canfd.c
index e5f7f8849a73..262b4c26c9d4 100644
--- a/drivers/net/can/usb/nct6694_canfd.c
+++ b/drivers/net/can/usb/nct6694_canfd.c
@@ -18,12 +18,6 @@
#define DEVICE_NAME "nct6694-canfd"
-/* USB command module type for NCT6694 CANfd controller.
- * This defines the module type used for communication with the NCT6694
- * CANfd controller over the USB interface.
- */
-#define NCT6694_CANFD_MOD 0x05
-
/* Command 00h - CAN Setting and Initialization */
#define NCT6694_CANFD_SETTING 0x00
#define NCT6694_CANFD_SETTING_ACTIVE_CTRL1 BIT(0)
diff --git a/drivers/rtc/rtc-nct6694.c b/drivers/rtc/rtc-nct6694.c
index 35401a0d9cf5..c06902f150c9 100644
--- a/drivers/rtc/rtc-nct6694.c
+++ b/drivers/rtc/rtc-nct6694.c
@@ -14,13 +14,6 @@
#include <linux/rtc.h>
#include <linux/slab.h>
-/*
- * USB command module type for NCT6694 RTC controller.
- * This defines the module type used for communication with the NCT6694
- * RTC controller over the USB interface.
- */
-#define NCT6694_RTC_MOD 0x08
-
/* Command 00h - RTC Time */
#define NCT6694_RTC_TIME 0x0000
#define NCT6694_RTC_TIME_SEL 0x00
diff --git a/drivers/watchdog/nct6694_wdt.c b/drivers/watchdog/nct6694_wdt.c
index bc3689bd4b6b..4c06ac105562 100644
--- a/drivers/watchdog/nct6694_wdt.c
+++ b/drivers/watchdog/nct6694_wdt.c
@@ -20,13 +20,6 @@
#define NCT6694_WDT_MAX_DEVS 2
-/*
- * USB command module type for NCT6694 WDT controller.
- * This defines the module type used for communication with the NCT6694
- * WDT controller over the USB interface.
- */
-#define NCT6694_WDT_MOD 0x07
-
/* Command 00h - WDT Setup */
#define NCT6694_WDT_SETUP 0x00
#define NCT6694_WDT_SETUP_SEL(idx) (idx ? 0x01 : 0x00)
diff --git a/include/linux/mfd/nct6694.h b/include/linux/mfd/nct6694.h
index 6eb9be2cd4a0..3c683e317aa3 100644
--- a/include/linux/mfd/nct6694.h
+++ b/include/linux/mfd/nct6694.h
@@ -8,6 +8,15 @@
#ifndef __MFD_NCT6694_H
#define __MFD_NCT6694_H
+#define NCT6694_HWMON_MOD 0x00
+#define NCT6694_PWM_MOD 0x01
+#define NCT6694_I2C_MOD 0x03
+#define NCT6694_CANFD_MOD 0x05
+#define NCT6694_WDT_MOD 0x07
+#define NCT6694_RTC_MOD 0x08
+#define NCT6694_RPT_MOD 0xFF
+#define NCT6694_GPIO_MOD NCT6694_RPT_MOD
+
#define NCT6694_VENDOR_ID 0x0416
#define NCT6694_PRODUCT_ID 0x200B
#define NCT6694_INT_IN_EP 0x81
--
2.34.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not
affiliated with the servers or forums shown here and is not responsible for
the content of articles, which is written by their respective authors.