Re: [PATCH v2 0/3] arm64: dts: qcom: initial MSM8920 and Motorola Moto E4 (perry)

On 7/23/26 3:46 AM, Aneesh Pradhan wrote:
> Initial upstream support for MSM8920 and the Motorola Moto E4 (perry).
> 
> Depends on the separate qcom,rpmcc-msm8920 clk series (binding +
> clk-smd-rpm) for the MSM8920 rpmcc compatible used by msm8920.dtsi.
> 
> This is a trimmed mainline-first subset of msm89x7-mainline/linux#48,
> rewritten so every phandle exists on qcom/for-next's msm8917 / pm8937 /
> pmi8950 (the fork DT assumed richer SoC/PMIC nodes that are not
> upstream yet).
> 
> Included: regulators, eMMC/SD, USB OTG (gpio-id extcon), keys, RMI4
> touch + reset-gpios, BMA253 (i2c-gpio), WCNSS (wcn3660b), PMI8950 WLED.
> Deferred follow-ups: DSI panel, IPA, QDSP6 audio, FG/smbcharger, modem.
> 
> DTB build verified: msm8917-motorola-perry.dtb + msm8920-motorola-perry.dtb.

Please send all series as separate threads and all revisions as separate
threads too. You can use the b4 tool [1] which takes care of that and a
couple other annoyances

Konrad

[1] https://b4.docs.kernel.org/en/latest/