[PATCH v2] dt-bindings: clock: ti,da850-pll: Convert to DT schema

Convert TI da850-pll binding from legacy text to dt schema.
No functional change is introduced during conversion.

Signed-off-by: Bhargav Joshi <[email protected]>
---
Changes in v2:
- Moved 'items' list for clocks and clock-names to the top-level
  properties block.
- Dropped redundant maxItems: 2 to fix dt_binding_check warnings.
- Simplified allOf block to only restrict maxItems for pll1.
- updated maintainers list
- Link to v1: https://lore.kernel.org/r/[email protected]
---
 .../devicetree/bindings/clock/ti/davinci/pll.txt   |  96 ------------
 .../bindings/clock/ti/davinci/ti,da850-pll.yaml    | 164 +++++++++++++++++++++
 2 files changed, 164 insertions(+), 96 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt b/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
deleted file mode 100644
index c9894538315b..000000000000
--- a/Documentation/devicetree/bindings/clock/ti/davinci/pll.txt
+++ /dev/null
@@ -1,96 +0,0 @@
-Binding for TI DaVinci PLL Controllers
-
-The PLL provides clocks to most of the components on the SoC. In addition
-to the PLL itself, this controller also contains bypasses, gates, dividers,
-an multiplexers for various clock signals.
-
-Required properties:
-- compatible: shall be one of:
-	- "ti,da850-pll0" for PLL0 on DA850/OMAP-L138/AM18XX
-	- "ti,da850-pll1" for PLL1 on DA850/OMAP-L138/AM18XX
-- reg: physical base address and size of the controller's register area.
-- clocks: phandles corresponding to the clock names
-- clock-names: names of the clock sources - depends on compatible string
-	- for "ti,da850-pll0", shall be "clksrc", "extclksrc"
-	- for "ti,da850-pll1", shall be "clksrc"
-
-Optional properties:
-- ti,clkmode-square-wave: Indicates that the board is supplying a square
-	wave input on the OSCIN pin instead of using a crystal oscillator.
-	This property is only valid when compatible = "ti,da850-pll0".
-
-
-Optional child nodes:
-
-pllout
-	Describes the main PLL clock output (before POSTDIV). The node name must
-	be "pllout".
-
-	Required properties:
-	- #clock-cells: shall be 0
-
-sysclk
-	Describes the PLLDIVn divider clocks that provide the SYSCLKn clock
-	domains. The node name must be "sysclk". Consumers of this node should
-	use "n" in "SYSCLKn" as the index parameter for the clock cell.
-
-	Required properties:
-	- #clock-cells: shall be 1
-
-auxclk
-	Describes the AUXCLK output of the PLL. The node name must be "auxclk".
-	This child node is only valid when compatible = "ti,da850-pll0".
-
-	Required properties:
-	- #clock-cells: shall be 0
-
-obsclk
-	Describes the OBSCLK output of the PLL. The node name must be "obsclk".
-
-	Required properties:
-	- #clock-cells: shall be 0
-
-
-Examples:
-
-	pll0: clock-controller@11000 {
-		compatible = "ti,da850-pll0";
-		reg = <0x11000 0x1000>;
-		clocks = <&ref_clk>, <&pll1_sysclk 3>;
-		clock-names = "clksrc", "extclksrc";
-		ti,clkmode-square-wave;
-
-		pll0_pllout: pllout {
-			#clock-cells = <0>;
-		};
-
-		pll0_sysclk: sysclk {
-			#clock-cells = <1>;
-		};
-
-		pll0_auxclk: auxclk {
-			#clock-cells = <0>;
-		};
-
-		pll0_obsclk: obsclk {
-			#clock-cells = <0>;
-		};
-	};
-
-	pll1: clock-controller@21a000 {
-		compatible = "ti,da850-pll1";
-		reg = <0x21a000 0x1000>;
-		clocks = <&ref_clk>;
-		clock-names = "clksrc";
-
-		pll0_sysclk: sysclk {
-			#clock-cells = <1>;
-		};
-
-		pll0_obsclk: obsclk {
-			#clock-cells = <0>;
-		};
-	};
-
-Also see:
-- Documentation/devicetree/bindings/clock/clock-bindings.txt
diff --git a/Documentation/devicetree/bindings/clock/ti/davinci/ti,da850-pll.yaml b/Documentation/devicetree/bindings/clock/ti/davinci/ti,da850-pll.yaml
new file mode 100644
index 000000000000..c6563290a702
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/davinci/ti,da850-pll.yaml
@@ -0,0 +1,164 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/ti/davinci/ti,da850-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DaVinci PLL Controllers
+
+maintainers:
+  - David Lechner <[email protected]>
+
+description:
+  The PLL provides clocks to most of the components on the SoC. In addition to
+  the PLL itself, this controller also contains bypasses, gates, dividers, an
+  multiplexers for various clock signals.
+
+properties:
+  compatible:
+    enum:
+      - ti,da850-pll0
+      - ti,da850-pll1
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Primary reference clock input
+      - description: External clock source
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: clksrc
+      - const: extclksrc
+
+  ti,clkmode-square-wave:
+    type: boolean
+    description:
+      Indicates that the board is supplying a square wave input on the OSCIN
+      pin instead of using a crystal oscillator.
+
+  pllout:
+    type: object
+    description:
+      Main PLL clock output before POSTDIV.
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    required:
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  sysclk:
+    type: object
+    description:
+      PLLDIVn divider clocks that provide the SYSCLKn clock domains. Consumers
+      of this node should use "n" in "SYSCLKn" as the index parameter for the
+      clock cell.
+
+    properties:
+      '#clock-cells':
+        const: 1
+
+    required:
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  auxclk:
+    type: object
+    description:
+      AUXCLK output of the PLL
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    required:
+      - '#clock-cells'
+
+    additionalProperties: false
+
+  obsclk:
+    type: object
+    description:
+      the OBSCLK output of the PLL.
+
+    properties:
+      '#clock-cells':
+        const: 0
+
+    required:
+      - '#clock-cells'
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          const: ti,da850-pll1
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+        ti,clkmode-square-wave: false
+        auxclk: false
+
+examples:
+  - |
+    clock-controller@11000 {
+        compatible = "ti,da850-pll0";
+        reg = <0x11000 0x1000>;
+        clocks = <&ref_clk>, <&pll1_sysclk 3>;
+        clock-names = "clksrc", "extclksrc";
+        ti,clkmode-square-wave;
+
+        pllout {
+            #clock-cells = <0>;
+        };
+
+        sysclk {
+            #clock-cells = <1>;
+        };
+
+        auxclk {
+            #clock-cells = <0>;
+        };
+
+        obsclk {
+            #clock-cells = <0>;
+        };
+    };
+
+  - |
+    clock-controller@21a000 {
+        compatible = "ti,da850-pll1";
+        reg = <0x21a000 0x1000>;
+        clocks = <&ref_clk>;
+        clock-names = "clksrc";
+
+        sysclk {
+            #clock-cells = <1>;
+        };
+
+        obsclk {
+            #clock-cells = <0>;
+        };
+    };

---
base-commit: dc59e4fea9d83f03bad6bddf3fa2e52491777482
change-id: 20260630-ti-pll-94f8eb9918c8

Best regards,
-- 
Bhargav