[PATCH 2/2] clk: qcom: Add support for camera clock controller on Maili
Jagadeesh Kona <[email protected]>
| Newsgroups | org.kernel.vger.linux-clk,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Maili camcc is mostly identical to Hawi camcc, with a few clocks removed, frequency table updates for a few other clocks, and PLL configuration changes. Hence, reuse the Hawi camera clock controller driver and extend it for the Qualcomm Maili SoC. Signed-off-by: Jagadeesh Kona <[email protected]> --- drivers/clk/qcom/camcc-hawi.c | 158 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 158 insertions(+) diff --git a/drivers/clk/qcom/camcc-hawi.c b/drivers/clk/qcom/camcc-hawi.c index 5b004a627fddead1e7d229bcc8f7c2bfae3560a0..e56afb42edd397945a486181cf120f30aed39c3a 100644 --- a/drivers/clk/qcom/camcc-hawi.c +++ b/drivers/clk/qcom/camcc-hawi.c @@ -61,6 +61,18 @@ static const struct alpha_pll_config cam_cc_pll0_config = { .user_ctl_hi_val = 0x00000002, }; +/* 1200.0 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll0_config_maili = { + .l = 0x3e, + .cal_l = 0x42, + .alpha = 0x8000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00008400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll0 = { .offset = 0x0, .config = &cam_cc_pll0_config, @@ -136,6 +148,18 @@ static const struct alpha_pll_config cam_cc_pll1_config = { .user_ctl_hi_val = 0x00000002, }; +/* 493.2 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll1_config_maili = { + .l = 0x19, + .cal_l = 0x42, + .alpha = 0xb000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll1 = { .offset = 0x1000, .config = &cam_cc_pll1_config, @@ -188,6 +212,18 @@ static const struct alpha_pll_config cam_cc_pll2_config = { .user_ctl_hi_val = 0x00000002, }; +/* 600.0 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll2_config_maili = { + .l = 0x1f, + .cal_l = 0x42, + .alpha = 0x4000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll2 = { .offset = 0x2000, .config = &cam_cc_pll2_config, @@ -240,6 +276,18 @@ static const struct alpha_pll_config cam_cc_pll3_config = { .user_ctl_hi_val = 0x00000002, }; +/* 476.4 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll3_config_maili = { + .l = 0x18, + .cal_l = 0x42, + .alpha = 0xd000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll3 = { .offset = 0x3000, .config = &cam_cc_pll3_config, @@ -292,6 +340,18 @@ static const struct alpha_pll_config cam_cc_pll4_config = { .user_ctl_hi_val = 0x00000002, }; +/* 476.4 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll4_config_maili = { + .l = 0x18, + .cal_l = 0x42, + .alpha = 0xd000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll4 = { .offset = 0x4000, .config = &cam_cc_pll4_config, @@ -344,6 +404,18 @@ static const struct alpha_pll_config cam_cc_pll5_config = { .user_ctl_hi_val = 0x00000002, }; +/* 476.4 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll5_config_maili = { + .l = 0x18, + .cal_l = 0x42, + .alpha = 0xd000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll5 = { .offset = 0x5000, .config = &cam_cc_pll5_config, @@ -396,6 +468,18 @@ static const struct alpha_pll_config cam_cc_pll6_config = { .user_ctl_hi_val = 0x00000002, }; +/* 960.0 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll6_config_maili = { + .l = 0x32, + .cal_l = 0x42, + .alpha = 0x0, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00008400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll6 = { .offset = 0x6000, .config = &cam_cc_pll6_config, @@ -471,6 +555,18 @@ static const struct alpha_pll_config cam_cc_pll7_config = { .user_ctl_hi_val = 0x00000002, }; +/* 345.0 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll7_config_maili = { + .l = 0x11, + .cal_l = 0x42, + .alpha = 0xf800, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000000, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll7 = { .offset = 0x7000, .config = &cam_cc_pll7_config, @@ -500,6 +596,18 @@ static const struct alpha_pll_config cam_cc_pll8_config = { .user_ctl_hi_val = 0x00000002, }; +/* 493.2 MHz Configuration */ +static const struct alpha_pll_config cam_cc_pll8_config_maili = { + .l = 0x19, + .cal_l = 0x42, + .alpha = 0xb000, + .config_ctl_val = 0xa5c400e7, + .config_ctl_hi_val = 0x0a806160, + .config_ctl_hi1_val = 0xf51dea20, + .user_ctl_val = 0x00000400, + .user_ctl_hi_val = 0x00000002, +}; + static struct clk_alpha_pll cam_cc_pll8 = { .offset = 0x8000, .config = &cam_cc_pll8_config, @@ -677,6 +785,17 @@ static const struct freq_tbl ftbl_cam_cc_camnoc_rt_axi_clk_src[] = { { } }; +static const struct freq_tbl ftbl_cam_cc_camnoc_rt_axi_clk_src_maili[] = { + F(19200000, P_BI_TCXO, 1, 0, 0), + F(200000000, P_CAM_CC_PLL0_OUT_MAIN, 6, 0, 0), + F(240000000, P_CAM_CC_PLL0_OUT_MAIN, 5, 0, 0), + F(300000000, P_CAM_CC_PLL0_OUT_MAIN, 4, 0, 0), + F(400000000, P_CAM_CC_PLL0_OUT_MAIN, 3, 0, 0), + F(480000000, P_CAM_CC_PLL0_OUT_MAIN, 2.5, 0, 0), + F(600000000, P_CAM_CC_PLL0_OUT_MAIN, 2, 0, 0), + { } +}; + static struct clk_rcg2 cam_cc_camnoc_rt_axi_clk_src = { .cmd_rcgr = 0x212cc, .mnd_width = 0, @@ -698,6 +817,11 @@ static const struct freq_tbl ftbl_cam_cc_cci_0_clk_src[] = { { } }; +static const struct freq_tbl ftbl_cam_cc_cci_0_clk_src_maili[] = { + F(37500000, P_CAM_CC_PLL0_OUT_EVEN, 16, 0, 0), + { } +}; + static struct clk_rcg2 cam_cc_cci_0_clk_src = { .cmd_rcgr = 0x21250, .mnd_width = 8, @@ -1071,6 +1195,17 @@ static const struct freq_tbl ftbl_cam_cc_ofe_clk_src[] = { { } }; +static const struct freq_tbl ftbl_cam_cc_ofe_clk_src_maili[] = { + F(300000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(376000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(445000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(500000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(609000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(688000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + F(841000000, P_CAM_CC_PLL2_OUT_EVEN, 1, 0, 0), + { } +}; + static struct clk_rcg2 cam_cc_ofe_clk_src = { .cmd_rcgr = 0x20120, .mnd_width = 0, @@ -2961,12 +3096,35 @@ static const struct qcom_cc_desc cam_cc_hawi_desc = { static const struct of_device_id cam_cc_hawi_match_table[] = { { .compatible = "qcom,hawi-camcc" }, + { .compatible = "qcom,maili-camcc" }, { } }; MODULE_DEVICE_TABLE(of, cam_cc_hawi_match_table); static int cam_cc_hawi_probe(struct platform_device *pdev) { + if (device_is_compatible(&pdev->dev, "qcom,maili-camcc")) { + cam_cc_pll0.config = &cam_cc_pll0_config_maili; + cam_cc_pll1.config = &cam_cc_pll1_config_maili; + cam_cc_pll2.config = &cam_cc_pll2_config_maili; + cam_cc_pll3.config = &cam_cc_pll3_config_maili; + cam_cc_pll4.config = &cam_cc_pll4_config_maili; + cam_cc_pll5.config = &cam_cc_pll5_config_maili; + cam_cc_pll6.config = &cam_cc_pll6_config_maili; + cam_cc_pll7.config = &cam_cc_pll7_config_maili; + cam_cc_pll8.config = &cam_cc_pll8_config_maili; + + cam_cc_camnoc_rt_axi_clk_src.freq_tbl = ftbl_cam_cc_camnoc_rt_axi_clk_src_maili; + cam_cc_cci_0_clk_src.freq_tbl = ftbl_cam_cc_cci_0_clk_src_maili; + cam_cc_ofe_clk_src.freq_tbl = ftbl_cam_cc_ofe_clk_src_maili; + + cam_cc_hawi_clocks[CAM_CC_CCI_2_CLK_SRC] = NULL; + cam_cc_hawi_clocks[CAM_CC_CCI_2_CLK] = NULL; + cam_cc_hawi_clocks[CAM_CC_CSI5PHYTIMER_CLK_SRC] = NULL; + cam_cc_hawi_clocks[CAM_CC_CSI5PHYTIMER_CLK] = NULL; + cam_cc_hawi_clocks[CAM_CC_CSIPHY5_CLK] = NULL; + } + return qcom_cc_probe(pdev, &cam_cc_hawi_desc); } -- 2.34.1