[PATCH v2 11/12] arm64: dts: qcom: ipq5210: Add CMN PLL device node

Add CMN PLL node for enabling output clocks to the networking
hardware blocks on IPQ5210 devices.

The reference clock of CMN PLL is routed from XO to the CMN PLL
through the WiFi block.
XO (48 MHZ or 96 MHZ or 192 MHZ)-->WiFi (multiplier/divider)-->
48 MHZ to CMN PLL.

Signed-off-by: Luo Jie <[email protected]>
---
 arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 15 +++++++++++++++
 arch/arm64/boot/dts/qcom/ipq5210.dtsi       | 24 ++++++++++++++++++++++++
 2 files changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
index 941f866ecfe9..7410d092814e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts
@@ -74,6 +74,21 @@ &uart1 {
 	status = "okay";
 };
 
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
 &xo_board {
 	clock-frequency = <24000000>;
 };
+
+&xo_clk {
+	clock-frequency = <48000000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5210.dtsi b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
index 2cdc10529c48..7025bdd9036e 100644
--- a/arch/arm64/boot/dts/qcom/ipq5210.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5210.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,ipq5210-gcc.h>
+#include <dt-bindings/clock/qcom,ipq5210-cmn-pll.h>
 #include <dt-bindings/reset/qcom,ipq5210-gcc.h>
 
 / {
@@ -13,6 +14,12 @@ / {
 	interrupt-parent = <&intc>;
 
 	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -22,6 +29,11 @@ xo_board: xo-board-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
+
+		xo_clk: xo-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+		};
 	};
 
 	cpus {
@@ -130,6 +142,18 @@ soc@0 {
 		dma-ranges = <0 0 0 0 0x10 0>;
 		ranges = <0 0 0 0 0x10 0>;
 
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5210-cmn-pll";
+			reg = <0x0 0x0009b000 0x0 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5210_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5210-tlmm";
 			reg = <0x0 0x01000000 0x0 0x300000>;

-- 
2.43.0