[PATCH] clk: imx: scu: fix autosuspend cleanup on probe failure

imx_clk_scu_probe() calls pm_runtime_use_autosuspend() for non-CPU
clocks, but its probe failure paths do not call the matching
pm_runtime_dont_use_autosuspend() before disabling runtime PM.

If the autosuspend delay is set to a negative value while autosuspend
is enabled, the runtime PM core increments usage_count to prevent
runtime suspend. Without calling pm_runtime_dont_use_autosuspend()
during cleanup, this reference is not dropped and usage_count remains
unbalanced.

Add the missing pm_runtime_dont_use_autosuspend() calls to the probe
failure paths before disabling runtime PM.

This issue was found by manual code inspection.

Fixes: 78edeb080330 ("clk: imx: scu: add runtime pm support")
Cc: [email protected]
Signed-off-by: Guangshuo Li <[email protected]>
---
 drivers/clk/imx/clk-scu.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/clk/imx/clk-scu.c b/drivers/clk/imx/clk-scu.c
index 9b33df9967ec..6d29fcc2306d 100644
--- a/drivers/clk/imx/clk-scu.c
+++ b/drivers/clk/imx/clk-scu.c
@@ -542,6 +542,7 @@ static int imx_clk_scu_probe(struct platform_device *pdev)
 		ret = pm_runtime_resume_and_get(dev);
 		if (ret) {
 			pm_genpd_remove_device(dev);
+			pm_runtime_dont_use_autosuspend(dev);
 			pm_runtime_disable(dev);
 			return ret;
 		}
@@ -550,6 +551,9 @@ static int imx_clk_scu_probe(struct platform_device *pdev)
 	hw = __imx_clk_scu(dev, clk->name, clk->parents, clk->num_parents,
 			   clk->rsrc, clk->clk_type);
 	if (IS_ERR(hw)) {
+		if (!(clk->rsrc == IMX_SC_R_A35 || clk->rsrc == IMX_SC_R_A53 ||
+		      clk->rsrc == IMX_SC_R_A72))
+			pm_runtime_dont_use_autosuspend(dev);
 		pm_runtime_disable(dev);
 		return PTR_ERR(hw);
 	}
-- 
2.43.0