Re: [PATCH 09/15] pinctrl: qcom: Add Kuno pinctrl driver

On Sun, 9 Aug 2026 09:27:08 +0200, Hardeep Sharma
<[email protected]> said:
> Add the TLMM pinctrl driver for the Qualcomm Kuno platform, supporting
> 110 GPIOs and their pin multiplexing, pin configuration and gpiolib
> interface through the common pinctrl-msm driver.
>
> Signed-off-by: Hardeep Sharma <[email protected]>
> ---
> +

...

> +static const struct pinfunction kuno_functions[] = {
> +	MSM_PIN_FUNCTION(gpio),

MSM_GPIO_PIN_FUNCTION() ?

> +	MSM_PIN_FUNCTION(audio_ref_clk),
> +	MSM_PIN_FUNCTION(coex_uart),
> +	MSM_PIN_FUNCTION(ebi2_lcd_a),
> +	MSM_PIN_FUNCTION(ebi2_lcd_cs),
> +	MSM_PIN_FUNCTION(ebi2_lcd_reset),
> +	MSM_PIN_FUNCTION(ebi2_lcd_te),
> +	MSM_PIN_FUNCTION(emac_mdc),
> +	MSM_PIN_FUNCTION(emac_mdio),
> +	MSM_PIN_FUNCTION(emac_pps_in),
> +	MSM_PIN_FUNCTION(emac_ptp_aux),
> +	MSM_PIN_FUNCTION(emac_ptp_pps),
> +	MSM_PIN_FUNCTION(gcc_gp1_clk),
> +	MSM_PIN_FUNCTION(gcc_gp2_clk),
> +	MSM_PIN_FUNCTION(gcc_gp3_clk),
> +	MSM_PIN_FUNCTION(mi2s0_data0),
> +	MSM_PIN_FUNCTION(mi2s0_data1),
> +	MSM_PIN_FUNCTION(mi2s0_sck),
> +	MSM_PIN_FUNCTION(mi2s0_ws),
> +	MSM_PIN_FUNCTION(mi2s1_data0),
> +	MSM_PIN_FUNCTION(mi2s1_data1),
> +	MSM_PIN_FUNCTION(mi2s1_sck),
> +	MSM_PIN_FUNCTION(mi2s1_ws),
> +	MSM_PIN_FUNCTION(mi2s_mclk),
> +	MSM_PIN_FUNCTION(nav_gpio),

Possibly here too?

> +	MSM_PIN_FUNCTION(pci_e_rst),
> +	MSM_PIN_FUNCTION(pcie_clkreq_n),
> +	MSM_PIN_FUNCTION(pll_bist_sync),
> +	MSM_PIN_FUNCTION(pll_clk_aux),
> +	MSM_PIN_FUNCTION(qdss_cti_trig0),
> +	MSM_PIN_FUNCTION(qdss_cti_trig1),
> +	MSM_PIN_FUNCTION(qdss_gpio_traceclk),
> +	MSM_PIN_FUNCTION(qdss_gpio_tracectl),
> +	MSM_PIN_FUNCTION(qup0_se0),
> +	MSM_PIN_FUNCTION(qup0_se1),
> +	MSM_PIN_FUNCTION(qup0_se2),
> +	MSM_PIN_FUNCTION(qup0_se3_mira),
> +	MSM_PIN_FUNCTION(qup0_se3_mirb),
> +	MSM_PIN_FUNCTION(qup0_se4),
> +	MSM_PIN_FUNCTION(sdc4_clk),
> +	MSM_PIN_FUNCTION(sdc4_cmd),
> +	MSM_PIN_FUNCTION(sdc4_data),
> +	MSM_PIN_FUNCTION(sdc4_tb_trig),
> +	MSM_PIN_FUNCTION(sgmii_phy_intr),
> +	MSM_PIN_FUNCTION(spmi_coex_clk),
> +	MSM_PIN_FUNCTION(spmi_coex_data),
> +	MSM_PIN_FUNCTION(spmi_vgi_hwevent),
> +	MSM_PIN_FUNCTION(uim1_clk),
> +	MSM_PIN_FUNCTION(uim1_data),
> +	MSM_PIN_FUNCTION(uim1_present),
> +	MSM_PIN_FUNCTION(uim1_reset),
> +	MSM_PIN_FUNCTION(usb2phy_ac_en),
> +};
> +

Bart