[PATCH 45/45] clk: zynqmp: Make sure clk_init_data is fully initialized

The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need.  However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.

Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.

Signed-off-by: Geert Uytterhoeven <[email protected]>
---
Compile-tested only.
---
 drivers/clk/zynqmp/clk-gate-zynqmp.c | 2 +-
 drivers/clk/zynqmp/clk-mux-zynqmp.c  | 2 +-
 drivers/clk/zynqmp/divider.c         | 2 +-
 drivers/clk/zynqmp/pll.c             | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/zynqmp/clk-gate-zynqmp.c b/drivers/clk/zynqmp/clk-gate-zynqmp.c
index db10eb69f3fe01a5..1a462af7b8ea3efa 100644
--- a/drivers/clk/zynqmp/clk-gate-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-gate-zynqmp.c
@@ -109,10 +109,10 @@ struct clk_hw *zynqmp_clk_register_gate(const char *name, u32 clk_id,
 					u8 num_parents,
 					const struct clock_topology *nodes)
 {
+	struct clk_init_data init = {};
 	struct zynqmp_clk_gate *gate;
 	struct clk_hw *hw;
 	int ret;
-	struct clk_init_data init;
 
 	/* allocate the gate */
 	gate = kzalloc_obj(*gate);
diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c
index e37bd3516974c1ee..79509e387b51fe40 100644
--- a/drivers/clk/zynqmp/clk-mux-zynqmp.c
+++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c
@@ -133,9 +133,9 @@ struct clk_hw *zynqmp_clk_register_mux(const char *name, u32 clk_id,
 				       u8 num_parents,
 				       const struct clock_topology *nodes)
 {
+	struct clk_init_data init = {};
 	struct zynqmp_clk_mux *mux;
 	struct clk_hw *hw;
-	struct clk_init_data init;
 	int ret;
 
 	mux = kzalloc_obj(*mux);
diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c
index 4075f6ecf076a8e6..3eabd1cf211ddba3 100644
--- a/drivers/clk/zynqmp/divider.c
+++ b/drivers/clk/zynqmp/divider.c
@@ -278,9 +278,9 @@ struct clk_hw *zynqmp_clk_register_divider(const char *name,
 					   u8 num_parents,
 					   const struct clock_topology *nodes)
 {
+	struct clk_init_data init = {};
 	struct zynqmp_clk_divider *div;
 	struct clk_hw *hw;
-	struct clk_init_data init;
 	int ret;
 
 	/* allocate the divider */
diff --git a/drivers/clk/zynqmp/pll.c b/drivers/clk/zynqmp/pll.c
index 6463787cf57b6018..6158386ca743d1f8 100644
--- a/drivers/clk/zynqmp/pll.c
+++ b/drivers/clk/zynqmp/pll.c
@@ -313,9 +313,9 @@ struct clk_hw *zynqmp_clk_register_pll(const char *name, u32 clk_id,
 				       u8 num_parents,
 				       const struct clock_topology *nodes)
 {
+	struct clk_init_data init = {};
 	struct zynqmp_pll *pll;
 	struct clk_hw *hw;
-	struct clk_init_data init;
 	int ret;
 
 	init.name = name;
-- 
2.43.0