[PATCH 3/5] rtc: nct3018y: Make sure clk_init_data is fully initialized

The clk_init_data structure contains several mutually-exclusive members
for different methods to specify the possible parents of a clock,
prompting drivers to initialize only the members they need.  However,
not initializing all members may cause subtle issues, which are only
exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
enabled.

Make sure all members are fully initialized, to avoid such bugs, and to
prevent future breakage when converting drivers to a different method
for specifying the parents.

Signed-off-by: Geert Uytterhoeven <[email protected]>
---
Compile-tested only.
---
 drivers/rtc/rtc-nct3018y.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/rtc/rtc-nct3018y.c b/drivers/rtc/rtc-nct3018y.c
index 700a395fad3a63b6..2f7ad57057a4b8a1 100644
--- a/drivers/rtc/rtc-nct3018y.c
+++ b/drivers/rtc/rtc-nct3018y.c
@@ -459,8 +459,8 @@ static struct clk *nct3018y_clkout_register_clk(struct nct3018y *nct3018y)
 {
 	struct i2c_client *client = nct3018y->client;
 	struct device_node *node = client->dev.of_node;
+	struct clk_init_data init = {};
 	struct clk *clk;
-	struct clk_init_data init;
 
 	init.name = "nct3018y-clkout";
 	init.ops = &nct3018y_clkout_ops;
-- 
2.43.0