Re: [PATCH 0/5] rtc: Make sure clk_init_data is fully initialized
Alexandre Belloni <[email protected]>
| Newsgroups | org.kernel.vger.linux-clk,org.kernel.vger.linux-rtc,org.ozlabs.lists.openbmc |
|---|---|
| Message-ID | <178751460908.816082.16865012450264727395.b4-ty@b4> |
On Fri, 21 Aug 2026 12:09:01 +0200, Geert Uytterhoeven wrote:
> Hi all,
>
> The clk_init_data structure contains several mutually-exclusive members
> for different methods to specify the possible parents of a clock,
> prompting drivers to initialize only the members they need. However,
> not initializing all members may cause subtle issues, which are only
> exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is
> enabled.
>
> [...]
Applied, thanks!
[1/5] rtc: hym8563: Make sure clk_init_data is fully initialized
https://git.kernel.org/abelloni/c/db005bdaa5ff
[2/5] rtc: m41t80: Make sure clk_init_data is fully initialized
https://git.kernel.org/abelloni/c/bdcedfee8b87
[3/5] rtc: nct3018y: Make sure clk_init_data is fully initialized
https://git.kernel.org/abelloni/c/096c7ef4ef66
[4/5] rtc: philips: Make sure clk_init_data is fully initialized
https://git.kernel.org/abelloni/c/5ef3d51a3aaa
[5/5] rtc: microcrystal: Make sure clk_init_data is fully initialized
https://git.kernel.org/abelloni/c/a12eac458814
Best regards,
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com