Re: [PATCH v5] tools/mm: Add script to display page state for a given PID and VADDR
Stephen Brennan <[email protected]> Fri, 30 May 2025 15:01:55 -0700
| Newsgroups | org.kernel.vger.linux-debuggers,org.kernel.vger.linux-kernel,org.kernel.vger.linux-toolchains,org.kvack.linux-mm |
|---|---|
| Message-ID | <[email protected]> |
Ye Liu <[email protected]> writes: > Introduces a new drgn script, `show_page_info.py`, which allows users > to analyze the state of a page given a process ID (PID) and a virtual > address (VADDR). This can help kernel developers or debuggers easily > inspect page-related information in a live kernel or vmcore. > > The script extracts information such as the page flags, mapping, and > other metadata relevant to diagnosing memory issues. > > Output example: > sudo ./show_page_info.py 1 0x7fc988181000 > PID: 1 Comm: systemd mm: 0xffff8d22c4089700 > RAW: 0017ffffc000416c fffff939062ff708 fffff939062ffe08 ffff8d23062a12a8 > RAW: 0000000000000000 ffff8d2323438f60 0000002500000007 ffff8d23203ff500 > Page Address: 0xfffff93905664e00 > Page Flags: PG_referenced|PG_uptodate|PG_lru|PG_head|PG_active| > PG_private|PG_reported|PG_has_hwpoisoned > Page Size: 4096 > Page PFN: 0x159938 > Page Physical: 0x159938000 > Page Virtual: 0xffff8d2319938000 > Page Refcount: 37 > Page Mapcount: 7 > Page Index: 0x0 > Page Memcg Data: 0xffff8d23203ff500 > Memcg Name: init.scope > Memcg Path: /sys/fs/cgroup/memory/init.scope > Page Mapping: 0xffff8d23062a12a8 > Page Anon/File: File > Page VMA: 0xffff8d22e06e0e40 > VMA Start: 0x7fc988181000 > VMA End: 0x7fc988185000 > This page is part of a compound page. > This page is the head page of a compound page. > Head Page: 0xfffff93905664e00 > Compound Order: 2 > Number of Pages: 4 > > Signed-off-by: Ye Liu <[email protected]> Reviewed-by: Stephen Brennan <[email protected]> > > Changes in v5: > - Use platform-aware word-size reads instead of raw byte access. > - Replace Object() with drgn.cast() for type safety. > - Better handle memcg flags and error cases. > - Exit on fatal errors with sys.exit(). > - Remove 'User Virtual Address'. > - Link to v4:https://lore.kernel.org/all/[email protected]/ > > Changes in v4: > - Add error and exception handling. > - Adjust the way to obtain PAGE_SIZE. > - Fix the acquisition of memcg. > - Link to v3:https://lore.kernel.org/all/[email protected]/ > > Changes in v3: > - Adjust display style. > - Link to v2:https://lore.kernel.org/all/[email protected]/ > > Changes in v2: > - Move the show_page_info.py file to tools/mm. > - Link to v1: https://lore.kernel.org/all/[email protected]/ > --- > MAINTAINERS | 5 ++ > tools/mm/show_page_info.py | 169 +++++++++++++++++++++++++++++++++++++ > 2 files changed, 174 insertions(+) > create mode 100644 tools/mm/show_page_info.py > > diff --git a/MAINTAINERS b/MAINTAINERS > index 0cb9e55021cb..3cbd46bf1eab 100644 > --- a/MAINTAINERS > +++ b/MAINTAINERS > @@ -18726,6 +18726,11 @@ F: Documentation/mm/page_table_check.rst > F: include/linux/page_table_check.h > F: mm/page_table_check.c > > +PAGE STATE DEBUG SCRIPT > +M: Ye Liu <[email protected]> > +S: Maintained > +F: tools/mm/show_page_info.py > + > PANASONIC LAPTOP ACPI EXTRAS DRIVER > M: Kenneth Chan <[email protected]> > L: [email protected] > diff --git a/tools/mm/show_page_info.py b/tools/mm/show_page_info.py > new file mode 100644 > index 000000000000..c46d8ea283d7 > --- /dev/null > +++ b/tools/mm/show_page_info.py > @@ -0,0 +1,169 @@ > +#!/usr/bin/env drgn > +# SPDX-License-Identifier: GPL-2.0-only > +# Copyright (C) 2025 Ye Liu <[email protected]> > + > +import argparse > +import sys > +from drgn import Object, FaultError, PlatformFlags, cast > +from drgn.helpers.linux import find_task, follow_page, page_size > +from drgn.helpers.linux.mm import ( > + decode_page_flags, page_to_pfn, page_to_phys, page_to_virt, vma_find, > + PageSlab, PageCompound, PageHead, PageTail, compound_head, compound_order, compound_nr > +) > +from drgn.helpers.linux.cgroup import cgroup_name, cgroup_path > + > +DESC = """ > +This is a drgn script to show the page state. > +For more info on drgn, visit https://github.com/osandov/drgn. > +""" > + > +def format_page_data(page): > + """ > + Format raw page data into a readable hex dump with "RAW:" prefix. > + > + :param page: drgn.Object instance representing the page. > + :return: Formatted string of memory contents. > + """ > + try: > + address = page.value_() > + size = prog.type("struct page").size > + > + if prog.platform.flags & PlatformFlags.IS_64_BIT: > + word_size = 8 > + else: > + word_size = 4 > + num_words = size // word_size > + > + values = [] > + for i in range(num_words): > + word_address = address + i * word_size > + word = prog.read_word(word_address) > + values.append(f"{word:0{word_size * 2}x}") > + > + lines = [f"RAW: {' '.join(values[i:i + 4])}" for i in range(0, len(values), 4)] > + > + return "\n".join(lines) > + > + except FaultError as e: > + return f"Error reading memory: {e}" > + except Exception as e: > + return f"Unexpected error: {e}" > + > +def get_memcg_info(page): > + """Retrieve memory cgroup information for a page.""" > + try: > + MEMCG_DATA_OBJEXTS = prog.constant("MEMCG_DATA_OBJEXTS").value_() > + MEMCG_DATA_KMEM = prog.constant("MEMCG_DATA_KMEM").value_() > + mask = prog.constant('__NR_MEMCG_DATA_FLAGS').value_() - 1 > + memcg_data = page.memcg_data.read_() > + if memcg_data & MEMCG_DATA_OBJEXTS: > + slabobj_ext = cast("struct slabobj_ext *", memcg_data & ~mask) > + memcg = slabobj_ext.objcg.memcg.value_() > + elif memcg_data & MEMCG_DATA_KMEM: > + objcg = cast("struct obj_cgroup *", memcg_data & ~mask) > + memcg = objcg.memcg.value_() > + else: > + memcg = cast("struct mem_cgroup *", memcg_data & ~mask) > + > + if memcg.value_() == 0: > + return "none", "/sys/fs/cgroup/memory/" > + cgrp = memcg.css.cgroup > + return cgroup_name(cgrp).decode(), f"/sys/fs/cgroup/memory{cgroup_path(cgrp).decode()}" > + except FaultError as e: > + return "unknown", f"Error retrieving memcg info: {e}" > + except Exception as e: > + return "unknown", f"Unexpected error: {e}" > + > +def show_page_state(page, addr, mm, pid, task): > + """Display detailed information about a page.""" > + try: > + print(f'PID: {pid} Comm: {task.comm.string_().decode()} mm: {hex(mm)}') > + try: > + print(format_page_data(page)) > + except FaultError as e: > + print(f"Error reading page data: {e}") > + fields = { > + "Page Address": hex(page.value_()), > + "Page Flags": decode_page_flags(page), > + "Page Size": prog["PAGE_SIZE"].value_(), > + "Page PFN": hex(page_to_pfn(page).value_()), > + "Page Physical": hex(page_to_phys(page).value_()), > + "Page Virtual": hex(page_to_virt(page).value_()), > + "Page Refcount": page._refcount.counter.value_(), > + "Page Mapcount": page._mapcount.counter.value_(), > + "Page Index": hex(page.__folio_index.value_()), > + "Page Memcg Data": hex(page.memcg_data.value_()), > + } > + > + memcg_name, memcg_path = get_memcg_info(page) > + fields["Memcg Name"] = memcg_name > + fields["Memcg Path"] = memcg_path > + fields["Page Mapping"] = hex(page.mapping.value_()) > + fields["Page Anon/File"] = "Anon" if page.mapping.value_() & 0x1 else "File" > + > + try: > + vma = vma_find(mm, addr) > + fields["Page VMA"] = hex(vma.value_()) > + fields["VMA Start"] = hex(vma.vm_start.value_()) > + fields["VMA End"] = hex(vma.vm_end.value_()) > + except FaultError as e: > + fields["Page VMA"] = "Unavailable" > + fields["VMA Start"] = "Unavailable" > + fields["VMA End"] = "Unavailable" > + print(f"Error retrieving VMA information: {e}") > + > + # Calculate the maximum field name length for alignment > + max_field_len = max(len(field) for field in fields) > + > + # Print aligned fields > + for field, value in fields.items(): > + print(f"{field}:".ljust(max_field_len + 2) + f"{value}") > + > + # Additional information about the page > + if PageSlab(page): > + print("This page belongs to the slab allocator.") > + > + if PageCompound(page): > + print("This page is part of a compound page.") > + if PageHead(page): > + print("This page is the head page of a compound page.") > + if PageTail(page): > + print("This page is the tail page of a compound page.") > + print(f"{'Head Page:'.ljust(max_field_len + 2)}{hex(compound_head(page).value_())}") > + print(f"{'Compound Order:'.ljust(max_field_len + 2)}{compound_order(page).value_()}") > + print(f"{'Number of Pages:'.ljust(max_field_len + 2)}{compound_nr(page).value_()}") > + else: > + print("This page is not part of a compound page.") > + except FaultError as e: > + print(f"Error accessing page state: {e}") > + except Exception as e: > + print(f"Unexpected error: {e}") > + > +def main(): > + """Main function to parse arguments and display page state.""" > + parser = argparse.ArgumentParser(description=DESC, formatter_class=argparse.RawTextHelpFormatter) > + parser.add_argument('pid', metavar='PID', type=int, help='Target process ID (PID)') > + parser.add_argument('vaddr', metavar='VADDR', type=str, help='Target virtual address in hexadecimal format (e.g., 0x7fff1234abcd)') > + args = parser.parse_args() > + > + try: > + vaddr = int(args.vaddr, 16) > + except ValueError: > + sys.exit(f"Error: Invalid virtual address format: {args.vaddr}") > + > + try: > + task = find_task(args.pid) > + mm = task.mm > + page = follow_page(mm, vaddr) > + > + if page: > + show_page_state(page, vaddr, mm, args.pid, task) > + else: > + sys.exit(f"Address {hex(vaddr)} is not mapped.") > + except FaultError as e: > + sys.exit(f"Error accessing task or memory: {e}") > + except Exception as e: > + sys.exit(f"Unexpected error: {e}") > + > +if __name__ == "__main__": > + main() > -- > 2.25.1