Re: [PATCH v2 1/2] dt-bindings: clock: qcom: Add Hawi GPU clock controllers

Krzysztof Kozlowski <[email protected]>
Newsgroups org.kernel.vger.linux-devicetree,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-clk,org.kernel.vger.linux-kernel
Message-ID <20260803-bulky-thistle-mongoose-80327e@quoll>
On Thu, Jul 30, 2026 at 10:53:48PM -0700, Dongfang Zhao wrote:
> Add the device tree binding and clock, reset and power-domain IDs for the
> Hawi graphics clock controller. This lets Hawi device trees describe the
> GPU clocks, resets and power domains, and lets dtbs_check validate those
> nodes.
> 
> Add the qcom,hawi-gxclkctl compatible for the Hawi GX clock controller,
> using qcom,kaanapali-gxclkctl as the fallback because the register layout
> is identical.
> 
> Signed-off-by: Dongfang Zhao <[email protected]>
> ---
>  .../devicetree/bindings/clock/qcom,hawi-gpucc.yaml | 78 ++++++++++++++++++++++
>  .../bindings/clock/qcom,kaanapali-gxclkctl.yaml    | 22 +++---
>  include/dt-bindings/clock/qcom,hawi-gpucc.h        | 47 +++++++++++++
>  3 files changed, 139 insertions(+), 8 deletions(-)

Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.