Re: [PATCH] dt-bindings: power: Convert TI SmartReflex to DT schema

On Thu, Jul 30, 2026 at 12:24:54PM +0300, Eduard Bostina wrote:
> Convert the Texas Instruments SmartReflex bindings to DT schema.
> 
> Signed-off-by: Eduard Bostina <[email protected]>
> ---
>  .../bindings/power/ti,smartreflex.yaml        | 70 +++++++++++++++++++
>  .../bindings/power/ti-smartreflex.txt         | 47 -------------
>  2 files changed, 70 insertions(+), 47 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/power/ti,smartreflex.yaml
>  delete mode 100644 Documentation/devicetree/bindings/power/ti-smartreflex.txt
> 
> diff --git a/Documentation/devicetree/bindings/power/ti,smartreflex.yaml b/Documentation/devicetree/bindings/power/ti,smartreflex.yaml
> new file mode 100644
> index 000000000..b2dc59b4d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/ti,smartreflex.yaml
> @@ -0,0 +1,70 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/ti,smartreflex.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments SmartReflex
> +
> +maintainers:
> +  - Eduard Bostina <[email protected]>
> +
> +description: |

Drop '|'

> +  SmartReflex is used to set and adjust the SoC operating points.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,omap3-smartreflex-core
> +      - ti,omap3-smartreflex-mpu-iva
> +      - ti,omap4-smartreflex-core
> +      - ti,omap4-smartreflex-mpu
> +      - ti,omap4-smartreflex-iva
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  ti,hwmods:
> +    description: Shall contain the TI interconnect module name if needed by the SoC
> +    $ref: /schemas/types.yaml#/definitions/string

deprecated: true

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    smartreflex@4a0db000 {
> +        compatible = "ti,omap4-smartreflex-iva";
> +        reg = <0x4a0db000 0x80>;
> +        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
> +        ti,hwmods = "smartreflex_iva";
> +    };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    smartreflex@4a0dd000 {
> +        compatible = "ti,omap4-smartreflex-core";
> +        reg = <0x4a0dd000 0x80>;
> +        interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
> +        ti,hwmods = "smartreflex_core";
> +    };
> +
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    smartreflex@4a0d9000 {
> +        compatible = "ti,omap4-smartreflex-mpu";
> +        reg = <0x4a0d9000 0x80>;
> +        interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
> +        ti,hwmods = "smartreflex_mpu";
> +    };

One example is enough.

Rob