Re: [PATCH v2 1/3] dt-bindings: mmc: Add power-off-delay-us property
"Rob Herring (Arm)" <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-mmc |
|---|---|
| Message-ID | <[email protected]> |
On Wed, 22 Jul 2026 15:56:59 -0500, Judith Mendez wrote: > Add power-off-delay-us property to MMC controller common. > > This property shall be used to specify value of delay after > deasserting power during MMC power cycles. Default for delay > is 1000us but custom delay can be passed in to work around > hardware issues such as slow RC discharge on MMC VDD rails. > > Signed-off-by: Judith Mendez <[email protected]> > --- > Changes since v1: > - Change post-power-off-delay-ms to power-off-delay-us > - Fixup dt property description > - Fix check binding warnings and remove $ref > - Fix minimum from 0 to 1us > --- > .../devicetree/bindings/mmc/mmc-controller-common.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > Acked-by: Rob Herring (Arm) <[email protected]>