Re: [PATCH v8 3/6] arm64: dts: qcom: Add device tree for Nord Embedded variant

Mukesh Savaliya <[email protected]>
Newsgroups org.kernel.vger.linux-devicetree,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-kernel
Message-ID <[email protected]>

On 7/29/2026 6:30 AM, Shawn Guo wrote:
> Unlike the GearVM variant, Nord Embedded variant has platform resources
> (clocks, regulators, powerdomains, pins, etc.) directly controlled by
> the operating system. Add a separate dtsi file extending the existing
> top-level nord.dtsi with nodes representing these peripherals as well as
> describing how they are wired up with the already defined components.
> 
> Co-developed-by: Bartosz Golaszewski <[email protected]>
> Signed-off-by: Bartosz Golaszewski <[email protected]>
> Reviewed-by: Konrad Dybcio <[email protected]>
> Signed-off-by: Shawn Guo <[email protected]>
> ---
>   arch/arm64/boot/dts/qcom/nord-embedded.dtsi | 1726 +++++++++++++++++++
>   1 file changed, 1726 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/qcom/nord-embedded.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/nord-embedded.dtsi b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
> new file mode 100644
> index 000000000000..032d384f6eb3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/nord-embedded.dtsi
> @@ -0,0 +1,1726 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +#include <dt-bindings/clock/qcom,nord-gcc.h>
> +#include <dt-bindings/clock/qcom,nord-negcc.h>
> +#include <dt-bindings/clock/qcom,nord-nwgcc.h>
> +#include <dt-bindings/clock/qcom,nord-segcc.h>
> +#include <dt-bindings/clock/qcom,nord-tcsrcc.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,nord-rpmh.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +#include "nord.dtsi"
> +

[...]

> +
> +	qup_uart17_default: qup-uart17-default-state {
> +		pins = "gpio152", "gpio153";
Can we add all 4-wires including RTS, CTS so default usecase for 
Bluetooth with can be served ?
> +		function = "qup2_se3";
> +		drive-strength = <2>;
> +		bias-disable;
> +	};
> +

[...]
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.