[PATCH v3 0/3] ASoC: qcom: allow SM[456]50 HDK board to play audio via I2S
Neil Armstrong <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.kernel.vger.linux-arm-msm,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
Following [1], this adds the necessary settings to setup the I2S link to the HDMI bridge to allow audio playback. All dependencies are merges into sound.git for-7.3 [1] https://lore.kernel.org/all/[email protected]/ Signed-off-by: Neil Armstrong <[email protected]> --- Changes in v3: - Fixed node unit number on patch 3 - Link to v2: https://patch.msgid.link/[email protected] Changes in v2: - Dropped applied patch 1 - Fixed node unit number - Reversed clock names order to respect bindings - Link to v1: https://patch.msgid.link/[email protected] --- Neil Armstrong (3): arm64: dts: qcom: sm8450-hdk: Enable I2S for HDMI arm64: dts: qcom: sm8550-hdk: Enable I2S for HDMI arm64: dts: qcom: sm8650-hdk: Enable I2S for HDMI arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 36 +++++++++++++++- arch/arm64/boot/dts/qcom/sm8450.dtsi | 40 ++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8550-hdk.dts | 36 +++++++++++++++- arch/arm64/boot/dts/qcom/sm8550.dtsi | 73 +++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sm8650-hdk.dts | 35 +++++++++++++++- arch/arm64/boot/dts/qcom/sm8650.dtsi | 40 ++++++++++++++++++ 6 files changed, 257 insertions(+), 3 deletions(-) --- base-commit: c50ed4627e333934aaf0473a822169786c83dce5 change-id: 20260728-topic-sm8x50-next-hdk-i2s-6d63c25eceac Best regards, -- Neil Armstrong <[email protected]>