[PATCH v3 0/5] ARM: dts: aspeed: santabarbara: Add system monitoring GPIOs
Fred Chen <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.ozlabs.lists.linux-aspeed |
|---|---|
| Message-ID | <[email protected]> |
Update Santabarbara Device Tree to include several GPIO expanders for NIC, Switch, and system monitoring. v2 -> v3: - Reword the system monitoring GPIOs commit message - Disable power monitor nodes for ICs that now have multiple vendor sources - Add GPIO line names for the JTAG CPU debug interface - Add SGPIO line names for MCIO thermal trip monitoring and UFM read-complete - Add a leak-cable-presence IO expander on the module boards - Link to v2: https://lore.kernel.org/all/[email protected]/ v1 -> v2: - Add system power fault alert and E1S GPIO expander interrupt - Add switch board SKU IDs and power good monitoring - Add NIC1-4 power good monitoring, reset control, and fault detection - Update the commit message - Link to v1: https://lore.kernel.org/all/[email protected]/ Fred Chen (5): ARM: dts: aspeed: santabarbara: Add system monitoring GPIOs ARM: dts: aspeed: santabarbara: Disable power monitor nodes ARM: dts: aspeed: santabarbara: Add JTAG GPIO line names ARM: dts: aspeed: santabarbara: Add SGPIO line names ARM: dts: aspeed: santabarbara: Add leak cable present IO expander .../aspeed-bmc-facebook-santabarbara.dts | 200 +++++++++++++++++- 1 file changed, 192 insertions(+), 8 deletions(-) -- 2.52.0