[PATCH v3 4/5] ARM: dts: aspeed: santabarbara: Add SGPIO line names
Fred Chen <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel,org.ozlabs.lists.linux-aspeed |
|---|---|
| Message-ID | <[email protected]> |
Label two groups of SGPIO lines. - FM_MCIO_[1-4]_THERMTRIP_N: thermal trip signals carried over the MCIO cables, indicating overheat on each of the four asic modules. - UFM_READ_CMPLT: asserted by the BMC after it finishes reading UFM data, to notify the CPLD that the data can be cleared. Signed-off-by: Fred Chen <[email protected]> --- .../boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts index 9d334a01d407..3d35a5a74104 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts @@ -1907,7 +1907,7 @@ &sgpiom0 { "MB_SKU_ID_3","", "SYS_PWR_FAULT_ALERT","BIOS_DEBUG_MODE", /*H0-H3 line 112-119*/ - "FM_IOEXP_U538_INT_N","", + "FM_IOEXP_U538_INT_N","UFM_READ_CMPLT", "FM_IOEXP_U539_INT_N","FM_MODULE_PWR_EN_N_1B", "FM_IOEXP_U540_INT_N","FM_MODULE_PWR_EN_N_2B", "FM_IOEXP_U541_INT_N","FM_MODULE_PWR_EN_N_3B", @@ -1941,7 +1941,10 @@ &sgpiom0 { "I3C_MCIO_4B_ALERT_ISO_R_N","", "","", /*K4-K7 line 168-175*/ - "","","","","","","","", + "FM_MCIO_1_THERMTRIP_N","", + "FM_MCIO_2_THERMTRIP_N","", + "FM_MCIO_3_THERMTRIP_N","", + "FM_MCIO_4_THERMTRIP_N","", /*L0-L3 line 176-183*/ "FM_CPU0_THERMTRIP_N","", "FM_CPU0_PROCHOT_N","", -- 2.52.0