Re: [PATCH v4 1/2] dt-bindings: PCI: amd-mdb: Add CPM6 support
Rob Herring <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.kernel.vger.linux-kernel,org.kernel.vger.linux-pci |
|---|---|
| Message-ID | <[email protected]> |
On Sat, Aug 08, 2026 at 04:22:55PM +0530, Sai Krishna Musham wrote: > The AMD CPM6 PCIe controller is based on the Synopsys DesignWare PCIe IP. > Add "intr" to snps,dw-pcie.yaml vendor-specific reg-names for the > per-controller interrupt register region used by CPM6. > > Update amd,versal2-mdb-host.yaml with separate register definitions: > - MDB5: 4 regions (slcr, config, dbi, atu) > - CPM6: 5 regions (slcr, config, dbi, atu, intr) > > Signed-off-by: Sai Krishna Musham <[email protected]> > --- > Changes in v4: > - None > > Changes in v3: > - Update subject to match history. > - Move allOf to the end, after required block. > - Drop the CPM6 example. > > Changes in v2: > - Update the CPM6 device tree binding and example. > > v1 https://lore.kernel.org/all/[email protected]/ > v2 https://lore.kernel.org/all/[email protected]/ > v3 https://lore.kernel.org/all/[email protected]/ > --- > .../bindings/pci/amd,versal2-mdb-host.yaml | 45 ++++++++++++++++--- > .../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 + > 2 files changed, 42 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml > index 406c15e1dee1..672589066854 100644 > --- a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml > +++ b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml > @@ -9,27 +9,30 @@ title: AMD Versal2 MDB(Multimedia DMA Bridge) Host Controller > maintainers: > - Thippeswamy Havalige <[email protected]> > > -allOf: > - - $ref: /schemas/pci/pci-host-bridge.yaml# > - - $ref: /schemas/pci/snps,dw-pcie.yaml# > - > properties: > compatible: > - const: amd,versal2-mdb-host > + enum: > + - amd,versal2-mdb-host > + - amd,versal2-cpm6-host > + - amd,versal2-cpm6-host1 What is host and host1 difference? Please explain somewhere. > > reg: > + minItems: 4 > items: > - description: MDB System Level Control and Status Register (SLCR) Base > - description: configuration region > - description: data bus interface > - description: address translation unit register > + - description: CPM6 PCIe error and event interrupt registers > > reg-names: > + minItems: 4 > items: > - const: slcr > - const: config > - const: dbi > - const: atu > + - const: intr > > ranges: > maxItems: 2 > @@ -92,6 +95,38 @@ required: > - "#interrupt-cells" > - interrupt-controller > > +allOf: > + - $ref: /schemas/pci/pci-host-bridge.yaml# > + - $ref: /schemas/pci/snps,dw-pcie.yaml# > + - if: > + properties: > + compatible: > + contains: > + const: amd,versal2-mdb-host > + then: > + properties: > + reg: > + minItems: 4 Drop. 4 is already the min. > + maxItems: 4 > + reg-names: > + minItems: 4 > + maxItems: 4 > + - if: > + properties: > + compatible: > + contains: > + enum: > + - amd,versal2-cpm6-host > + - amd,versal2-cpm6-host1 > + then: > + properties: > + reg: > + minItems: 5 > + maxItems: 5 Drop. 5 is already the max. > + reg-names: > + minItems: 5 > + maxItems: 5 > + > unevaluatedProperties: false > > examples: > diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > index b3216141881c..21f86609ddb6 100644 > --- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > +++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml > @@ -117,6 +117,8 @@ properties: > enum: [ ecam ] > - description: AMD MDB PCIe SLCR region > const: slcr > + - description: AMD CPM6 PCIe error and event interrupt registers > + const: intr > allOf: > - contains: > enum: [ dbi, ctrl ] > -- > 2.44.4 >