[PATCH 7/7] dt-bindings: usb: ti,da830-musb: Convert to DT schema

Convert the TI DA8xx/OMAP-L1x MUSB text bindings to DT schema. Since
DA8xx MUSB node acts as a parent bus for the CPPI41 DMA controller add
required #address-cells, #size-cells, and ranges properties.

Signed-off-by: Bhargav Joshi <[email protected]>
---
 .../devicetree/bindings/usb/da8xx-usb.txt          |  69 -------------
 .../devicetree/bindings/usb/ti,da830-musb.yaml     | 111 +++++++++++++++++++++
 2 files changed, 111 insertions(+), 69 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt
deleted file mode 100644
index 00320d92d3bb..000000000000
--- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-TI DA8xx MUSB
-~~~~~~~~~~~~~
-For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms.
-
-Required properties:
-~~~~~~~~~~~~~~~~~~~~
- - compatible : Should be set to "ti,da830-musb".
-
- - reg: Offset and length of the USB controller register set.
-
- - interrupts: The USB interrupt number.
-
- - interrupt-names: Should be set to "mc".
-
- - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg".
-
- - phys: Phandle for the PHY device
-
- - phy-names: Should be "usb-phy"
-
- - dmas: specifies the dma channels
-
- - dma-names: specifies the names of the channels. Use "rxN" for receive
-   and "txN" for transmit endpoints. N specifies the endpoint number.
-
-Optional properties:
-~~~~~~~~~~~~~~~~~~~~
- - vbus-supply: Phandle to a regulator providing the USB bus power.
-
-Example:
-	usb_phy: usb-phy {
-		compatible = "ti,da830-usb-phy";
-		#phy-cells = <0>;
-	};
-	usb0: usb@200000 {
-		compatible = "ti,da830-musb";
-		reg = <0x00200000 0x1000>;
-		ranges;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		interrupts = <58>;
-		interrupt-names = "mc";
-
-		dr_mode = "host";
-		vbus-supply = <&usb_vbus>;
-		phys = <&usb_phy 0>;
-		phy-names = "usb-phy";
-
-		dmas = <&cppi41dma 0 0 &cppi41dma 1 0
-			&cppi41dma 2 0 &cppi41dma 3 0
-			&cppi41dma 0 1 &cppi41dma 1 1
-			&cppi41dma 2 1 &cppi41dma 3 1>;
-		dma-names =
-			"rx1", "rx2", "rx3", "rx4",
-			"tx1", "tx2", "tx3", "tx4";
-
-
-		cppi41dma: dma-controller@201000 {
-			compatible = "ti,da830-cppi41";
-			reg =  <0x201000 0x1000
-				0x202000 0x1000
-				0x204000 0x4000>;
-			reg-names = "controller", "scheduler", "queuemgr";
-			interrupts = <58>;
-			#dma-cells = <2>;
-			dma-channels = <4>;
-		};
-
-	};
diff --git a/Documentation/devicetree/bindings/usb/ti,da830-musb.yaml b/Documentation/devicetree/bindings/usb/ti,da830-musb.yaml
new file mode 100644
index 000000000000..c54bdfb4d1ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ti,da830-musb.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ti,da830-musb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI DA8xx MUSB
+
+maintainers:
+  - Sergei Shtylyov <[email protected]>
+
+allOf:
+  - $ref: /schemas/usb/usb-drd.yaml#
+
+properties:
+  compatible:
+    const: ti,da830-musb
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: mc
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb-phy
+
+  dmas:
+    minItems: 1
+    maxItems: 8
+
+  dma-names:
+    minItems: 1
+    maxItems: 8
+
+  vbus-supply:
+    description: Phandle to a regulator providing the USB bus power.
+
+  clocks:
+    maxItems: 1
+
+  clock-ranges: true
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+patternProperties:
+  "^dma-controller@[0-9a-f]+$":
+    $ref: /schemas/dma/ti/ti,cppi41.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - phys
+  - phy-names
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    usb@200000 {
+        compatible = "ti,da830-musb";
+        reg = <0x00200000 0x1000>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        interrupts = <58>;
+        interrupt-names = "mc";
+
+        dr_mode = "host";
+        vbus-supply = <&usb_vbus>;
+        phys = <&usb_phy 0>;
+        phy-names = "usb-phy";
+
+        clocks = <&psc1 1>;
+        clock-ranges;
+
+        dmas = <&cppi41dma 0 0>, <&cppi41dma 1 0>,
+               <&cppi41dma 2 0>, <&cppi41dma 3 0>,
+               <&cppi41dma 0 1>, <&cppi41dma 1 1>,
+               <&cppi41dma 2 1>, <&cppi41dma 3 1>;
+        dma-names = "rx1", "rx2", "rx3", "rx4",
+                    "tx1", "tx2", "tx3", "tx4";
+
+        dma-controller@201000 {
+            compatible = "ti,da830-cppi41";
+            reg = <0x201000 0x1000>,
+                  <0x202000 0x1000>,
+                  <0x204000 0x4000>;
+            reg-names = "controller", "scheduler", "queuemgr";
+            interrupts = <58>;
+            #dma-cells = <2>;
+            dma-channels = <4>;
+        };
+    };

-- 
2.55.0