[PATCH v2 3/3] ARM: dts: stm32: fix vdda supply for onboard hub on stm32mp135f-dk
Fabrice Gasnier <[email protected]>
| Newsgroups | org.kernel.vger.linux-devicetree,org.infradead.lists.linux-arm-kernel,org.kernel.vger.linux-kernel |
|---|---|
| Message-ID | <[email protected]> |
stm32mp135f-dk uses Microchip USB2514 HUB. Since vdda supply has been
added, the regulator framework wrongly associates the 'vdda' supply
dedicated to ADC, so the wrong regulator is referenced.
Only the 3v3 regulator is used to supply both the digital and the analog
part of the HUB.
Fixes: 673655f7944f ("usb: misc: onboard_dev: add vdda support for Microchip USB2514")
Signed-off-by: Gabriel Fernandez <[email protected]>
Signed-off-by: Fabrice Gasnier <[email protected]>
---
arch/arm/boot/dts/st/stm32mp135f-dk.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
index 6022e73f58af..5528b99ecf50 100644
--- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts
+++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts
@@ -628,6 +628,7 @@ hub@1 {
compatible = "usb424,2514";
reg = <1>;
vdd-supply = <&scmi_v3v3_sw>;
+ vdda-supply = <&scmi_v3v3_sw>;
};
};
--
2.43.0