Re: [PATCH v5 1/4] dt-bindings: hwmon: (pmbus/max20830): add VOUT feedback resistor properties and complete examples

Guenter Roeck <[email protected]>
Newsgroups org.kernel.vger.linux-doc,org.kernel.vger.linux-devicetree,org.kernel.vger.linux-hwmon,org.kernel.vger.linux-kernel
Message-ID <[email protected]> 
On Thu, Jul 30, 2026 at 09:03:33AM +0800, Alexis Czezar Torreno wrote:
> Add adi,vout-rfb1-ohms and adi,vout-rfb2-ohms properties to support
> external voltage divider configuration for VOUT sensing. When the
> desired output voltage is higher than VREF, a resistor divider (RFB1
> and RFB2) is required to reach the intended value.
> 
> The properties use a dependency constraint to ensure both resistors
> are specified together, or neither. This prevents misconfiguration
> where only one resistor value is provided.
> 
> This patch also adds missing entries in the examples.
> 
> Reviewed-by: Krzysztof Kozlowski <[email protected]>
> Signed-off-by: Alexis Czezar Torreno <[email protected]>

Applied.

Thanks,
Guenter
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.