[PATCH v3 02/23] mtd: spi-nor: Create a structure containing the flash opcodes

Create a structure named opcodes in the flash parameters structures to
store all the flash specific opcodes. They are typically discovered
dynamically through SFDP parsing. Move the die_erase opcode
inside. Later on we will add new fields there, like the supported
opcodes for accessing the status registers, which are almost vendor
specific.

No fonctional change.

Signed-off-by: Miquel Raynal <[email protected]>
---
 drivers/mtd/spi-nor/core.c      |  6 +++---
 drivers/mtd/spi-nor/core.h      | 14 +++++++++++---
 drivers/mtd/spi-nor/debugfs.c   |  2 +-
 drivers/mtd/spi-nor/micron-st.c |  4 ++--
 drivers/mtd/spi-nor/spansion.c  |  4 ++--
 5 files changed, 19 insertions(+), 11 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index fef7f426a3a2..29b8fe3d1c65 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -1140,7 +1140,7 @@ static int spi_nor_erase_die(struct spi_nor *nor, loff_t addr, size_t die_size)
 
 	if (nor->spimem) {
 		struct spi_mem_op op =
-			SPI_NOR_DIE_ERASE_OP(nor->params->die_erase_opcode,
+			SPI_NOR_DIE_ERASE_OP(nor->params->opcodes.die_erase,
 					     nor->addr_nbytes, addr, multi_die);
 
 		spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
@@ -3030,8 +3030,8 @@ static int spi_nor_late_init_params(struct spi_nor *nor)
 			return ret;
 	}
 
-	if (!nor->params->die_erase_opcode)
-		nor->params->die_erase_opcode = SPINOR_OP_CHIP_ERASE;
+	if (!nor->params->opcodes.die_erase)
+		nor->params->opcodes.die_erase = SPINOR_OP_CHIP_ERASE;
 
 	/* Default method kept for backward compatibility. */
 	if (!params->set_4byte_addr_mode)
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index ba2d1a862c9d..2cc0c80da3fa 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -340,6 +340,16 @@ struct spi_nor_otp {
 	const struct spi_nor_otp_ops *ops;
 };
 
+/**
+ * struct spi_nor_opcodes - SPI NOR flash specific opcodes.
+ * List of variable opcodes used by the chip.
+ *
+ * @die_erase: opcode for erasing a die, defaults to SPINOR_OP_CHIP_ERASE
+ */
+struct spi_nor_opcodes {
+	u8 die_erase;
+};
+
 /**
  * struct spi_nor_flash_parameter - SPI NOR flash parameters and settings.
  * Includes legacy flash parameters and settings that can be overwritten
@@ -362,7 +372,6 @@ struct spi_nor_otp {
  *			command in octal DTR mode.
  * @n_banks:		number of banks.
  * @n_dice:		number of dice in the flash memory.
- * @die_erase_opcode:	die erase opcode. Defaults to SPINOR_OP_CHIP_ERASE.
  * @vreg_offset:	volatile register offset for each die.
  * @hwcaps:		describes the read and page program hardware
  *			capabilities.
@@ -393,13 +402,12 @@ struct spi_nor_flash_parameter {
 	u8				rdsr_addr_nbytes;
 	u8				n_banks;
 	u8				n_dice;
-	u8				die_erase_opcode;
 	u32				*vreg_offset;
 
 	struct spi_nor_hwcaps		hwcaps;
 	struct spi_nor_read_command	reads[SNOR_CMD_READ_MAX];
 	struct spi_nor_pp_command	page_programs[SNOR_CMD_PP_MAX];
-
+	struct spi_nor_opcodes		opcodes;
 	struct spi_nor_erase_map        erase_map;
 	struct spi_nor_otp		otp;
 
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index 288e2866daed..ef6f0ffcd6bb 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -146,7 +146,7 @@ static int spi_nor_params_show(struct seq_file *s, void *data)
 
 	if (!(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
 		string_get_size(params->size, 1, STRING_UNITS_2, buf, sizeof(buf));
-		seq_printf(s, " %02x (%s)\n", params->die_erase_opcode, buf);
+		seq_printf(s, " %02x (%s)\n", params->opcodes.die_erase, buf);
 	}
 
 	seq_puts(s, "\nsector map\n");
diff --git a/drivers/mtd/spi-nor/micron-st.c b/drivers/mtd/spi-nor/micron-st.c
index c75b0a1cd567..031cf887318c 100644
--- a/drivers/mtd/spi-nor/micron-st.c
+++ b/drivers/mtd/spi-nor/micron-st.c
@@ -131,7 +131,7 @@ static int micron_st_nor_four_die_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 
-	params->die_erase_opcode = SPINOR_OP_MT_DIE_ERASE;
+	params->opcodes.die_erase = SPINOR_OP_MT_DIE_ERASE;
 	params->n_dice = 4;
 
 	/*
@@ -147,7 +147,7 @@ static int micron_st_nor_two_die_late_init(struct spi_nor *nor)
 {
 	struct spi_nor_flash_parameter *params = nor->params;
 
-	params->die_erase_opcode = SPINOR_OP_MT_DIE_ERASE;
+	params->opcodes.die_erase = SPINOR_OP_MT_DIE_ERASE;
 	params->n_dice = 2;
 
 	/*
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 15dcec09332a..2a8238c707e1 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -675,7 +675,7 @@ static int s25hx_t_late_init(struct spi_nor *nor)
 	cypress_nor_ecc_init(nor);
 
 	if (params->n_dice > 1)
-		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
+		params->opcodes.die_erase = SPINOR_OP_CYPRESS_DIE_ERASE;
 
 	return 0;
 }
@@ -763,7 +763,7 @@ static int s28hx_t_late_init(struct spi_nor *nor)
 	cypress_nor_ecc_init(nor);
 
 	if (params->n_dice > 1)
-		params->die_erase_opcode = SPINOR_OP_CYPRESS_DIE_ERASE;
+		params->opcodes.die_erase = SPINOR_OP_CYPRESS_DIE_ERASE;
 
 	return 0;
 }

-- 
2.54.0